User manual SPRINT ACE TRAVELING IN NAURU

[. . . ] Selecting Int'l GSM using the Samsung Ace: Press Start > More (left softkey) > More (left softkey) > Service Mode. 'Sprint CDMA' and 'Int'l GSM' appear in the selection window: Use the navigation key to select the Int'l GSM service mode and then press Apply (right softkey). A "Confirm Reset" dialog box appears in the display asking if you wish to change phone modes. Type `yes' in the box and press Apply (right softkey). [. . . ] To check if you have any new messages; Dial "+" Then "1" and your Sprint 10 digit number When voicemail answers, press * (star) and enter the voicemail passcode followed by # (pound). Texting You will need to enable your device to send texts while roaming on GSM networks. Once the steps to enable the device for sending texts on GSM networks are completed you will be able to send texts on any available network while traveling internationally; this process only needs to be completed once. Sprint Worldwide Traveling Tips > Traveling In Nauru Sprint coverage and rates subject to change at any time without notice; check www. sprint. com/sww for current rates and coverage prior to travel. 9/8/10 Sending a text while traveling is identical to sending a text from home. Texts can only be sent to international carriers supported by Sprint. For a list of supported carriers select `International Texting From US' from www. sprint. com/international, then select the link for international carriers. - To send a text to a U. S. -based number or to any number within the North American Numbering Plan (NANP)* simply enter the 10-digit number - To send a text to a non-US or non-NANP*-based number, enter 011 then the country code and number Note: Texting does not support + key dialing. Contact numbers stored in the address book with a + must be deleted prior to sending a text to that contact. *North American Numbering Plan (NANP) Countries: Anguilla, Antigua, Bahamas, Barbados, Bermuda, British Virgin Islands, Canada, Cayman Islands, Dominica, Dominican Republic, Grenada, Jamaica, Montserrat, St. Vincent and the Grenadines, Trinidad and Tobago, Turks and Caicos Islands, and U. S. Virgin Islands and Guam To enable device for sending texts on GSM networks: 1. Press Start > More (left softkey) > More (left softkey) > Service Mode 2. 'Sprint CDMA' and 'Int'l GSM' will appear in the selection window, select Int'l GSM 3. Press Apply (right softkey), "Confirm Reset" dialog box will appear in the display 4. Type `yes' in the box and press Apply (right softkey) 5. The device will power off and restart in the selected mode 6. Type +12819659999 into Text Messages Service Center, hit Done to finish Note: The number entered will only display in GSM mode and may not display the plus. Resolving Issues If unable to access voice/texting services then your issue may be resolved by following the steps below. Verify the device is not in Airplane mode and that the roaming setting is not set to Sprint only. Check to ensure the device is in Int'l GSM, see instructions on page 1. Verify the SIM Card is inserted correctly Press the battery cover release button, slide off the battery cover and remove the battery. [. . . ] 10am ­ 7pm Central) The Sprint Worldwide representative will need the following information to complete trouble resolutions: Your wireless phone number. The city and country you are traveling in. Contact number (hotel, number of another traveler in your party, etc. ) Time available for troubleshooting Amount of time will you be in the destination where trouble is occurring Any error messages that display on your device or that you heard when trying to place a call. If the issue is with voice service were you able to access data? [. . . ]