Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SRAM 5.4. We hope that this SRAM 5.4 user guide will be useful to you.
Lastmanuals help download the user guide SRAM 5.4.
Detailed instructions for use are in the User's Guide.
[. . . ] Program P2: This program has the same features as P1, but with different time and day settings, see following table. program P3: It is possible to customize , the time and day settings; programm the values of the reference temperatures (Tmin and Tmax). Moreover it is possible to activate the frost protection (indicated with ) which keeps the ambient temperature over 7°C. [. . . ] NOTE: To program Tmin or Tmax means that starting from the programmed time the thermostat operates so that the ambient assumes the programmed reference temperature value. ) * = seulement pour le programme P3 TECLAS + avance (presión continua = avance rápido) - retroceso (presión continua = retroceso rápido) Nota: en los programas P1, P2 y P3, apretando el pulsador +, se introduce la Tmax, apretando el pulsador -, se introduce la Tmin (mando manual) M memorización P preparado para la programación S selección de programas P + M Puesta a cero del aparato (reset). KEYS + Advance (long pressure = quick advancing) - Downward (long pressure = quick reverting) Note: With programs P1, P2, P3 pressing the key +, Tmax is activated, pressing the key - Tmin is activated (Manual operation) M Store P Preparation for programming S Selection of program P+M Delete memory (reset) DISPLAY INDICATIONS 1 - Day of the week (DAY 1 = Monday; DAY 2 = Tuesday etc. ) 2 - Indication of the max or min temperature with the programs P1, P2, P3 3 - Value of the programmed temperature 4 - Value of the ambient temperature (for the values > 40°C and < 5°C flashing indication) 5 - Programming in course (does not appear with the program MAN) *6 - Copying program 7 - Program selected (MAN, P1, P2, P3) 8 - Setting of time in course 9 - Exit ON/OFF 10 - Hour- minutes *11 - Frost protection activated *12 - Programming step (ON1, OFF1, ON2, OFF2 etc. Enter or modify the different values pressing the keys or +. By pressing the key M the set data is stored, and the program advances automatically to the next step. Attention: The programming is automatically annulled if the keys are not operated within 30". Press the key + to advance or the key - to go back, until the requested time appears (for instance 14 o'clock) store with the key M. Is set on a minimum temperature of 17°C and should the room temperature drop below this value, the heating system is turned on in order to go back to the minimum set value. If the heating system has to be kept totally off in the time intervals set at the minimum temperature, the latter has to be set at a lower value than the one that may be reached in the room. COPYING FUNCTION After programming the first day, the same program may be copied for the second day. In this case press M when "COPY" appears on the display. Program the following days as for day 1. For the other programs press P and then several times S; the display repeats the sequence of the stored data. It is possible to change the flashing numbers appearing on the display according to the procedure used for programming. TO DELETE A TIME SETTING IN PROGRAM P3 Select the time setting to be deleted pressing P and then several times S. [. . . ] It is possible to change the flashing numbers appearing on the display according to the procedure used for programming. TO DELETE A TIME SETTING IN PROGRAM P3 Select the time setting to be deleted pressing P and then several times S. Pressing the key - the frost protection is turned off Press M to store the function for DAY1 and pass automatically to DAY2. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SRAM 5.4
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SRAM 5.4 will begin.
