Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual STABO FREECOM 450 (PMR). We hope that this STABO FREECOM 450 (PMR) user guide will be useful to you.
Lastmanuals help download the user guide STABO FREECOM 450 (PMR).
Manual abstract: user guide STABO FREECOM 450 (PMR)
Detailed instructions for use are in the User's Guide.
[. . . ] Please read this booklet carefully to make yourself familiar with the various functions of your radio. Buttons are locked when pressed and held. Down t button (VOLUME/CHANNEL): Press to adjust volume level and change channels. TX (Transmission)/RX (Receiving) LED indicator: Illuminates red when transmitting and green when receiving. [. . . ] Refer to the "Channel Table" section of this Owner's Manual for detailed frequency listings. Selecting Scramble mode 3 times to enter to Scrambler selecting page. While Scrambler icon is displayed, and the "OF" icon or digit is flashing, press s/t button to select the desired scambler mode (off, 1, 2, 3, 4) 3. Both of the Transmission and Receiving units must be set into the same Scrambler mode or disable Scrambler function. nOTE: Scrambler feature adds an extra layer of privacy but does not guarantee full secrecy. Sending Call Tones You can use CALL TONES to alert the other when you are attempting to contact them. You can also use CALL TONES to signal the beginning or the end of a transmission. Press the CALL C button, the red TX LED indicator will light up and the CALL TONE continues for 3 seconds. Release the CALL C button, your CALL TONES will transmit to nearby receivers set to the same channel. Press the MENU button once to enter BASIC CHANNEL SELECTION mode. The current channel number flashes on the LCD Screen. While the channel number is flashing: = Press the Up s button to move to a higher channel. = Press the Down t button to move to a lower channel. = The channel changes from 1 to 8, or from 8 to 1. button to confirm the selected channel and 3. Press the ENTER return to the NORMAL mode. 26
27
Selecting Call Tone melodies 1. Press the MENU button 4 times to enter Call tone melodies selecting page. The Call Tone melody number will be changed ascending or descending in one step (1-10). Press Monitoring Radio Signal: You can use the MONITOR feature to check for weak signals in the current channel. Press the MONITOR M button once to activate this function. Rx icon will display on the LCD Screen while this function is activated. [. . . ] While the VOX icon is flashing, press Up s or Down t button and to select the "OF" mode. While the VOX mode is on, plug the connector of the headset (not included) into SP. /MIC jack of the communicator and then speak through the microphone of the headset to activate the transmitting mode. The TX LED indicator illuminates red when transmitting. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE STABO FREECOM 450 (PMR)
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual STABO FREECOM 450 (PMR) will begin.
