User manual STANDARD HORIZON CP180I

[. . . ] Color GPS Chart Plotters CP180/CP180i CP300/CP300i Owner's Manual CP180/180i CP300/300i WARNING!!!Electronic charts displayed by the GPS Chart Plotter are believed to be accurate and reliable, but are not intended to be a substitute for the official charts, which should remain your main reference for all matters related to the execution of safe navigation. For this reason we would like to remind you that you should carry on board and use the official published and approved nautical charts. FCC Compliance Statement This device complies with Part 15 of the FCC limits for Class A digital devices. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions may cause harmful interference with radio communications. [. . . ] Press [CLR] twice to revert to Home mode. 9. 5 SELECT DELETE REVERSE COLOR REPORT OTHER SETTINGS IN ROUTE MENU Choose an available Route to create or choose a stored Route to show and follow on the Chart page. Deletes the Route when shown in the above SELECT menu. Reverses the Route, when chosen Starting point is at the end of the Route. Allows changing the color of the navigation lines between in leg in the Route. The Route Report menu is useful to show details of the Waypoints contained within the Route. This menu also allows you to enter in your average speed and fuel consumption and calculate the approximate fuel used when following the Route. Sends the stored points to a external device (PC) capable of listening to NMEA RTE sentence. Receive the points from an external device (PC) capable of sending NMEA RTE sentence. You will notice the ROUTE menu has other selections. SEND RECEIVE GPS Chart Plotters Page 59 Page 60 GPS Chart Plotters 10. TRACKS The GPS Chart Plotter has the capability to store 5 individual tracks and record up to 3000 Track Points. Before using the Track function you will need to setup the Track function that suits your boat. The Track function tracks your vessels location as it moves through the water. The Track function can be setup to lay down a Track for a predetermined time or distance interval. If you have a fast moving boat you may want to setup the GPS Chart Plotter to record a Track point every 0. 5NM or if you have a sail boat you may want to setup to lay down a Track point once ever 1 minute. NOTE Please note the Track point memory is 3000 points. This means for a long journey you may have to adjust the time or distance to be able to track your journey. It should be noted when the 3000 Track points are used up, the first Track point layed down will be deleted when a new point is placed on the chart. 1. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT]. Move the ShuttlePoint knob to highlight TRACK and press [ENT]. Move the ShuttlePoint knob to highlight STEP UNIT and press [ENT] or move the ShuttlePoint knob to the right. Move the ShuttlePoint knob to highlight Dist or Time and press [ENT] or move the ShuttlePoint knob to the right. Figure 10 - Distance Units and Time Units 5. Move the ShuttlePoint knob to highlight DISTANCE or TIME step interval and press [ENT] or move the ShuttlePoint knob to the right. Move the ShuttlePoint knob up/down to the desired step value and press [ENT] or move the ShuttlePoint knob to the right. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown. 10. 0 TRACKING You may have to take a few trips to see how you like the Distance or Time Interval setup on the previous step. [. . . ] 98 XTE Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Z ZOOM IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 ZOOM OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Zoom Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]