User manual STANDARD HORIZON GX1250SA

[. . . ] ECLIPSE + GX1250SA 25 watt VHF/FM Marine Transceiver Owner's Manual Simple Operation Submersible Microphone Programmable Scan & Priority Ch16 Scan NOAA Weather Alert Backlit LCD & Keys STA ND HOR ARD IZON VOL/ PWR TABLE OF CONTENTS FCC NOTICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 2 FCC/ INDUSTRY CANADA INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Connect the antenna and power cables (and optional speaker) to the transceiver. Figure 4. Regular Mounting Bracket GX1250SA Owner's Manual page 13 4. 4 CMB16 FLUSH MOUNT INSTALLATION 1. Make a rectangular template for the flush mount measuring 2 inches (50 mm) H x 5 3/8" inches (135 mm) W. Use the template to mark the location where the rectangular hole is to be cut. Confirm the space behind the dash or panel is deep enough to accommodate the transceiver (at least 6 inches deep). There should be at least 1/2 inch between the transceiver's heatsink and any wiring, cables or structures. Cut out the rectangular hole and insert the transceiver. Fasten the brackets to the sides of the transceiver with the lock washer nut combination, so that the mounting screw base faces the mounting surface (see Figure 5). Turn the adjusting screw to adjust the tension so that the transceiver is tight against the mounting surface. Bracket Adjusting screw Lock-washer nut combination Figure 5. CMB16 Flush Mount Installation page 14 Owner's Manual GX1250SA 5 5. 1 RECEPTION OPERATION 1. After the transceiver has been installed, ensure that the power supply and antenna are properly connected. Turn the VOL/PWR knob until the transceiver turns on. Turn the SQL knob fully counterclockwise. This state is known as "squelch off". Turn up the volume until noise or audio from the speaker is at a comfortable level. Turn the SQL knob clockwise until the random noise disappears. This state is known as the "squelch threshold. " 6. Press the UP or DOWN key to select the desired channel. Refer to the channel chart in the OWNER'S MANUAL SUPPLEMENT for available channels. When a message is received, adjust the volume to the desired listening level. 5. 2 TRANSMISSION 1. Before transmitting, monitor the channel to ensure it is clear. [. . . ] 1. 5A Transmit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6A (Hi); 1. 7A (Lo) Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1/2" H x 6" W x 6" D (65 H x 150 W x 150 D mm) Flush-Mount Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2" H x 5-3/8" W x 5-1/4" D (50 H x 135 W x 133 D mm) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]