User manual STANDARD HORIZON GX1270S

[. . . ] INTREPID + GX1270S 25 Watt VHF/FM Marine Transceiver Owner's Manual Submersible One-Button DSC Distress Call Automatically Sends Latitude & Longitude and Vessel ID Noise Canceling "Clear Voice" Speaker Microphone Latitude & Longitude & Speed Over Ground & Course Over Ground Shown On Display When Connected To GPS Programmable Scan & Priority Ch16 Scan NOAA Weather Alert Backlit LCD & Keys 16/9 /PWR VOL + EPID INTR NAV N SCA RESS DIST OPEN PULL L SQ 16/9 WX L CAL ET /S H/L TABLE OF CONTENTS FCC RADIO LICENSE INFORMATION . . . . . . 1 STATION LICENSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 RADIO CALL SIGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FCC NOTICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Monitor channel 16 or traffic channel until the URGENCY communication is completed. 6. 11. 4 Receiving a geographical area call GEOGRAPHICAL ID366911111 JUN15 7:00P 1. An emergency alarm sounds (different from DISTRESS). Then the requested channel from the other ship is automatically selected. 2. Monitor the traffic channel for an announcement from the calling ship. NOTE This feature is only available when a GPS receiver is connected. GX1270S Owner's Manual page 32 6. 11. 5 Receiving an individual call When receiving an individual call, an acknowledgment must be sent back to the calling station. INDIVIDUAL BOB JUN15 4:00P 1. Then the radio automatically switches to the requested channel. 2. Press the PTT on the mic and talk to the calling ship. 6. 11. 6 Receiving a position request When a position request call is received from another vessel, a calling alarm will sound and POS REQUEST will show in the LCD. Operation and transceiver function differs depending on the SET UP POS REPLY mode setting. When a position request call is received, a POS REQUEST JIM calling alarm sounds 4 times. Then requested JUN15 7:00P A position coordinates are transmitted automatically. To exit from position request display, press any key. Manually reply: POS REQUEST JIM >REPLY EXIT A 1. When a position request call is received, the LCD will be as shown in the illustration on the left. Then select type of reply function REPLY or EXIT by using the UP or DOWN key. POS REQUEST JIM >REPLY EXIT A 3. When REPLY is selected, press the CALL/SET key. And the requested position coordinates will be transmitted. To exit from position request display, press any key. page 33 Owner's Manual GX1270S 7. 7. 1 SETUP >LAMP ADJUST CONTRAST CH NAME INDIV DIR DSC / RADIO SETUP MODE 1. Press and hold down the CALL/SET key until the SETUP menu appears. A 2. To select the items, press the UP or DOWN key. NOTE The Optional RAM MIC CMP23 cannot access the SETUP menu. The SETUP menu is displayed in the LCD of the CMP23 as shown in the illustration on the right. 7. 2 LAMP ADJUSTING >LAMP ADJUST CONTRAST CH NAME INDIV DIR >HI LO OFF A 1. Select LAMP ADJUST in the SETUP menu with the UP or DOWN key. A 2. [. . . ] 6A (Hi); 1. 7A (Lo) Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3/4" H x 6-1/2" W x 7-1/8" D (70 H x 164 W x 181 D mm) Flush-Mount Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2" H x 5-5/8" W x 5-1/4" D (51 H x 143 W x 133 D mm) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (0. 97 kg) 10. 2 TRANSMITTER Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]