User manual STANDARD HORIZON MATRIX SERIES GX2000

[. . . ] MATRIX SERIES GX2000 and GX2100 25 Watt VHF/FM Marine Transceivers Owner's Manual Integrated dual channel AIS (Automatic Identification System) receiver (GX2100) AIS (Automatic Identification System) receiver or transponder connection (GX2000) AIS target display: MMSI. Call Sign, Ship Name, BRG, DST, SOG, and COG Contact AIS Ship with DSC* 38400 AIS VDM sentence output to compatible GPS Chart Plotter (GX2100) 80 dB Commercial grade receiver Class D DSC (Digital Selective Calling) with Individual, All Ship, Position Report, Position Request, and Distress. Automatically poll up to 4 ships Independent Channel 70 receiver built-in for continuous DSC watch Local/Distance attenuator Enter, Save, and Navigation to waypoint with Compass page Navigation to a DSC Distress Call Submersible JIS-7 / IPX7 (3. 3 feet for 30 minutes) ClearVoice noise canceling speaker microphone with channel selection and 16/9 key Oversized rotary channel knob with push to enter, backlit display and keys 30 Watt PA/Loud Hailer with pre-programmed fog signals and (listen back GX2100) Capable of connecting an optional RAM3 second station remote microphone Intercom between radio and RAM3 DSC position request and report function when connected to compatible GPS chart plotter Voice Scrambler (optional) One button access to Channel 16 and 9 User programmable soft keys Navigation (LAT/LON, SOG, and COG) information shown on display E2O (Easy-To-Operate) menu system When connected to an optional GPS (GX2100) When connected to an optional GPS and AIS receiver or transponder (GX2000) MATRIX AIS GX2100 MATRIX GX2000 GX2000/GX2100 Page 1 TABLE OF CONTENTS Quick Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1 GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the channel you want is not shown, press the [MANUAL] soft key, then rotate the CHANNEL knob to select the operating channel you want to communicate on, then press the [SELECT] soft key. Press the [YES] soft key to transmit the Group Call signal. When the Group Call signal is sent, the display will be as shown in the illustration at the right. After the Group Call is transmitted, all the radios in the group will switch to the designated channel. Listen to the channel to make sure it is not busy, then press the microphone's PTT switch and call the other vessel you desire to communicate with. Manual Calling This feature allows you to contact a group of vessels by entering in their Group MMSI manually. Rotate the CHANNEL knob to select "GROUP". (To cancel, press the [QUIT] soft key. ) 3. The transceiver will beep, and the "Last Group Call" will appear. Select "MANUAL" with the CHANNEL knob. Rotate the CHANNEL knob to select the first number of the MMSI (nine digits: first digit permanently set to "0") which you want to contact, then press the [SELECT] soft key to step to the next number. If a mistake was made entering in the MMSI GX2000/GX2100 Page 65 9. 12. 13. number, repeat pressing the [BACK] soft key until the wrong number is selected, then rotate the CHANNEL knob to correct the entry. When finished entering the MMSI number, press and hold the [SELECT] soft key. Rotate the CHANNEL knob to select the operating channel you want to communicate on, then press the [SELECT] soft key. If the channel you want is not shown, press the [MANUAL] soft key, then rotate the CHANNEL knob to select the operating channel you want to communicate on, then press the [SELECT] soft key. Press the [YES] soft key to transmit the Group Call signal. After the Group Call is transmitted, all the radios in the group will switch to the designated channel. Listen to the channel to make sure it is not busy, then press the PTT button and talk into the microphone to the group of vessels. 11. 7. 3 Receiving a Group Call 1. When a group call is received, the GX2000/GX2100 will produce a ringing alarm sound. The radio will automatically switch to the requested channel. Press the [QUIT] soft key to stop the alarm. [. . . ] 50 dB Page 130 GX2000/GX2100 22. 3 RECEIVER (for Voice and DSC) Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156. 050 MHz to 163. 275 MHz Sensitivity 20 dB Quieting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 35 µV 12 dB SINAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 30 µV Squelch Sensitivity (Threshold) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]