User manual STANTON CM.203

[. . . ] CM. 203 DUAL TABLETOP CD PLAYER WITH MIXER USER MANUAL IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions ­ All the safety and operating instructions should be read before this product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] Use 4 screws to lock the ear in place. :: STEP 3 :: Repeat step 2 with the right rack ear. You can now turn the unit over. 4 QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers. Additionally, you can connect the REC output to any recording device such as a CD or DVD recorder. Now you are ready to switch everything on. IMPORTANT: Always switch on your audio input sources such as turntables or CD players first, then your mixer, and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers, then your mixer, and then input devices. 5 CD PLAYER FUNCTIONS 1. FADER START ­ You can use the crossfader to start and stop the CD decks. The fader start switch activates the fader start feature. When in the ON position, sliding the crossfader to either end will start the CD on that side and pause the CD on the other side and return to the cue point. Fader Start always starts from the cue point. TIME ­ LCD display reads the time remaining or time elapsed, according to this button. HEADPHONE INPUT ­ Insert either 1/8" or 1/4" plug for your headphones here. SGL/CTN ­ Switches between Single or Continuous play mode. TRACK ­ Used to select the track to be played. The +10 button skips 10 tracks at a time. 7. CUE ­ Used to recall and preview cue points. A new cue point is set every time playback is resumed. SEARCH ­ Scans forward or back through the current track. [. . . ] RELAY ­Set both sides of the CD player to single mode on the control. When Disc 1 ends the CD player will automatically change to Disc 2 and when Disc 2 ends it will return to Disc 1. MIC INPUT GAIN ­ Adjusts the microphone input level. MASTER LEVEL ­ Controls the overall output level. 31 25 32 30. [. . . ]