User manual STANTON S-450

[. . . ] PROFESSIONAL CD PLAYER TIME PITCH RANGE RATIO BPM IN BANK PGM 1 4 1 2 3 4 1 1 2 1 4 1 TAP OUT FX SEL. SCRATCH FILTER HOLD PHASE ECHO FLANGER TRANS REVERSE PAN SKID CUE TIME USERS MANUAL Important To Safety WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. [. . . ] The RATIO PARAMETER button is used adjust the FILTER/PHASE effect's frequency sweeping range. HOLD BUTTON This button allows you to set and lock any new parameters you set to the FX. This button will glow red when the hold function is activated. If the hold function is not selected any changes to the effect parameters will be momentary. ECHO/FLANGER BUTTON This button is used to activate and deactivate the ECHO effect, when the FX SEL. This button is used to activate and deactivate the FLANGER effect, when the FX SEL. The TIME PARAMETER button is used to adjust the ECHO/FLANGER effect's scan time in mini-second. The RATIO PARAMETER button is used adjust the ECHO/FLANGER effect's frequency sweeping range. TRANS/PAN BUTTON This button is used to activate and deactivate the TRANS effect, when the FX SEL. This button is used to activate and deactivate the PAN effect, when the FX SEL. The TIME PARAMETER button is used to adjust the TRANS/PAN effect's scan time in minisecond. The RATIO PARAMETER button is used to adjust the TRANS/PAN effect's frequency sweeping range. REVERSE BUTTON This button activates reverse play mode. This function will play your track or sampler in reverse. AUDIO OUT DIGITAL OUT RELAY POWER ON OFF AC IN~ 35 35 36 37 38 39 35. AUDIO OUT-SOCKETS This analogue signal requires RCA (left & right) connections. Connect this output to the respective input of your mixer (Line/Aux). DIGITAL OUT-SOCKET This digital signal requires one SP/DIF (75 Ohm) connection. Connect this output to the respective input of your mixer / computer. RELAY SOCKET Via the RELAY SOCKET, two CD players can be linked (connected) for relay play. If you connect to a mixer which supports fader start, you can also relay play via mixer's cross-fader. POWER SWITCH Press this button to activate the unit (i. e. AC CONNECTION Plug in the power supply cable here. LCD Display 14 15 14 13 12 11 6. [. . . ] If the unit is paused in this mode it will continue to play in reverse when playback begins again. Reverse loop play If the loop is less then 5 sec. then playback will continue in reverse until the reverse or loop function turn off. Otherwise, the loop will play in reverse once and turn off. [. . . ]