User manual STANTON S-650

[. . . ] REMAIN CONTINU TRACK M S F TRACK M S F REMAIN CONTINU PROFESSIONAL DUAL CD PLAYER IMPORTANT TO SAFETY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. [. . . ] Installing the Unit Mount the unit into your console or rack with 19" EIA rack rails. CAUTION: The player will work normally when the main unit is mounted with the front panel at within 15 degrees of the vertical plane. If the unit is tilted excessively, discs may not be loaded or unloaded properly. 15 The control panel's LCD's are designed to be clearly visible within the angles shown in Figure 2. Mount the control unit so that the visual angle is within this range. 45 5 Main unit Control panel Button . Figure 1 Figure 2 Connections 1) Turn off the POWER switch. 2) Connect the RCA pin cord to the input on your mixer. 3) Connect the control cords to the REMOTE connector on the main unit. CAUTION: Be sure to use the supplied control cords. Using another type of cable may result in damage. Be sure the power is off when connecting the control cords. Otherwise the units may not work properly. 6 OPERATIONS 1. Opening and Closing the Disc Holder Turn the unit power on. Press the OPEN/CLOSE button to open the disc holder. OPEN/CLOSE buttons are provided on both the main unit and control unit. The disc holder cannot be opened during playback to prevent playback from being interrupted if the OPEN/CLOSE button is pressed accidentally. Stop the playback first, then press the OPEN/CLOSE button. 2. Loading discs Hold the disc by the edges and place it in the disc holder, then press the OPEN/CLOSE button again to close the disc holder. The unit will show the total track number and the total playing time for about 2 seconds then enter the cue condition, the cue point will be set to the music starting point of the first track automatically. Figure 2-1 CAUTION: Do not place any foreign objects in the disc holder, and do not place more than one disc in the disc holder at a time. Do not push the disc holder in manually when the power is off, as this may result in malfunction and damages the player. 3. Selecting Tracks Press the SKIP button once to move to next higher or lower track. Hold the SKIP button to change tracks continuously at a higher speed. When a new track is selected during playback, playback begins as soon as the skip search operation is completed. [. . . ] Always store the disc in the jewel case to protect from dirt or damage. Do not place discs in the following areas: Areas exposed to directs sunlight for a considerable time. Areas subject to accumulation of dust or high humidity. Areas are affected by heat from indoor heaters, etc. . SPECIFICATIONS Dimensions: Main unit: Control unit: Player unit: Control unit: 482(W) x 88. 8(H) x 251(D) mm 482(W) x 88. 8(H) x 60(D) mm 5 kgs 2 kgs Weight: Power supply: Power consumption: Dual Voltage: AC 115/230V AC, 50/60Hz Single Voltage: AC 100V, 50Hz (For Japan) / AC 110V, 60Hz (For Taiwan) AC 120V, 60Hz (For U. S. A. , Canada) / AC 127V, 60Hz (For Mexico) AC 220V, 50Hz (For United Arab Emirates, Chile, Aegentina) AC 220V, 60Hz (For Philippines) AC 230V, 50Hz (For Europe, U. K. , New Zealand, South Africa, Singapore, Israel) AC 240V, 50Hz (For Australia) 25W 11 Stanton Magnetics, Inc. [. . . ]