User manual STANTON SA.5

[. . . ] SA. 5 OWNER'S MANUAL STANTON MAGNETICS, INC information@stantondj. com · 954. 689. 8833 www. stantondj. com WELCOME! Thank you for making Stanton your first choice in professional DJ mixers. Our innovative family of mixers has been developed with input from the professional DJ community. Stanton offers an affordable combination of user-friendly mixers with functional design, rugged construction and professional quality features which had been previously unavailable. Stanton and your authorized Stanton dealer are dedicated to your complete satisfaction by offering benchmark service and support throughout the long life of your Stanton product. [. . . ] AC IN: Input connection for the included power supply. Power switch: Turns the mixer on or off. Balanced Master output: TRS balanced (1/4") connectors are typically used to connect to a P. A. mixer or an amplifier for live performances or a recording console for recording. Unbalanced Master output: RCA connectors are typically used to connect to a home stereo or to another mixer with RCA inputs for practicing or team routines. Several SA. 5's can be daisy chained from this output via the session input (25). Master Trim: Controls the sensitivity of the Master output. Great when an additional boost or cut is needed. REC: The record output is not affected by the Master volume control. It can be used to record to a computer, CD, MD, & tape recorder, even while the master volume is turned down. Phono Trim: Used to adjust the gain of the phono pre-amp. Use this knob to control the sensitivity of the gain faders. Ground connector: Connects to the turntable ground connector to eliminate electrical hum. Ground cables are usually supplied with turntables. Some newer turntables such as the Stanton STR8. 150 do not require a ground cable because they are grounded internally. Session Input: This extra line level input is controlled by the session level fader (1) when the Session/Mic switch (27) is switched to session (the up position). It can be used as an extra line input or as a session input for team routines. B A C K PA N E L 28. Headphone output: Standard 1/4" headphone output connector. Session/Mic switch: Used to assign the Session/Mic fader to either the Session input or the MIC input. Microphone input: 1/4" connector for connecting a microphone. Phono Inputs: Phono level inputs for channels 1 and 2. Do not plug line outputs into phono inputs. [. . . ] Carefully wipe away any excess oil using a tissue or cloth. d) Lubricate the guide rail by placing one drop of silicon liquid oil onto the guide rail (F). f) Insert fader track back into fader body with wires coming out open end of fader body. g) Secure the remaining end block ensuring that the track wires (I) are not pinched between the end block and fader casing. [. . . ]