User manual STANTON SK-2

[. . . ] Remove the switch assembly and disconnect the cable coming from the mixer. Set the replacement switch assembly in the desired position and place the screws back in the top and bottom holes. OWNER'S M A N U A L © 1999, Stanton Magnetics, LLC STANTON MAGNETICS, LLC 2821 Evans St. Hollywood, FL 33020 (954) 929-8999 - Fax: (954) 929-0333 info@stantonmagnetics. com T RO U B LE S H O OT I N G Thank you for making Stanton your first choice in professional DJ mixers. This new, innovative family of mixers has been developed with input from the professional DJ community, bringing to the marketplace a previously unavailable, affordable combination of user-friendly, functional design, rugged construction, and professional quality features. [. . . ] · Your mixer contains no user-serviceable parts. The manufacturer is not responsible for any damage or personal injury resulting from unauthorized user-servicing or modifications. In addition, the warranty will be void if any unauthorized service by the user is detected. Always return you mixer to an authorized Stanton dealer for servicing. The amplifier is turned up, but there is no signal. Faulty output connections Improper level adjustment. No signal in headphones. Improper connection. Improper level or cue mix settings. D E S C R I P T I O N O F FU N C TI O N S 1. Mic gain control: Controls the overall microphone output level. Mic EQ: Individual controls for low frequency, midrange, and high frequency equalization with (+/-12 dB) Any changes made to EQ settings will change the overall microphone output level. Mic pan control: Controls left/right output balance of the microphone. Gain control: Controls the input sensitivity of each channel. EQ: Individual controls for low frequency, midrange, and high frequency equalization with (+9/-26 dB) Any changes made to EQ settings will change the overall output level. Pan control: Controls left/right output balance of each channel. Master level control: Controls the overall signal output level. Headphone level control: Controls the overall headphone output level. It is recommended headphones with an impedance rating of 200 ohms or less be used for maximum volume. Cue select: In "CUE" position, the pre-selected signal of control (10) will be monitored as a stereo signal in the headphones. In "MASTER" position, the pre-selected signal of controls (7) and (18) will be monitored as a stereo signal in the headphones. Cue pan: Fades the headphone output between channels 1 and 2, effectively allowing the user to preview a mix. Input selector switches: Selects phono or line inputs. FLASHTM position allows users to quickly trigger the phono input. Power indicator: Blue LED indicates whether mixer is ON or OFF. Input Fader Reverse: Reverses the direction of each respective input channel fader. Includes bi-color LED to indicate the status of the reverse function. When LED is red, the fader direction is reversed. [. . . ] Channel 2 inputs: Line and phono signal inputs 26. Ground connector: Connects to the turntable ground connector to eliminate electrical hum. Ground connectors usually supplied with turntables 27. Master output: TRS balanced (1/4") and unbalanced RCA. [. . . ]