User manual STANTON SK-6

[. . . ] Remove the switch assembly and disconnect the cable coming from the mixer. Set the replacement switch assembly in the desired position and place the screws back in the top and bottom holes. OWNER'S M A N U A L © 1999, Stanton Magnetics, LLC STANTON MAGNETICS, LLC 2821 Evans St. Hollywood, FL 33020 (954) 929-8999 - Fax: (954) 929-0333 info@stantonmagnetics. com T RO U B LE S H O OT I N G Thank you for making Stanton your first choice in professional DJ mixers. This new, innovative family of mixers has been developed with input from the professional DJ community, bringing to the marketplace a previously unavailable, affordable combination of user-friendly, functional design, rugged construction, and professional quality features. [. . . ] The manufacturer is not responsible for any damage or personal injury resulting from unauthorized user-servicing or modifications. In addition, the warranty will be void if any unauthorized service by the user is detected. Always return you mixer to an authorized Stanton dealer for servicing. The amplifier is turned up, but there is no signal. Faulty output connections Improper level adjustment. No signal in headphones. Improper connection. Improper level or cue mix settings. D E S C R I P T I O N O F FU N C TI O N S 1. Mic level control: Controls the overall microphone output level. Send: Controls the level of the effect send output. this is used to set the level of the signal going to the outbpard effects processor or stomp box. Return: Controls the level of the effect return input. This is used to control the level of the processed signal going back into themixer 4. FX: Effect ON/OFF for each channel, MIC, and cue. Gain: Controls the input level of each channel. EQ: Individual controls for low and high frequency equalization with (+9/-26 dB) Any changes made to EQ settings will change the overall output level. Master level control: Controls the overall signal output level. Headphone level control: Controls the overall headphone output level. It is recommended headphones with an impedance rating of 200 ohms or less be used for maximum volume. Cue pan: Fades the headphone output between channels 1 and 2, effectively allowing the user to preview a mix. Power indicator: Blue LED indicates whether mixer is ON or OFF. Input selector switches: Selects phono or line inputs. FLASHTM position allows users to quickly trigger the phono input. Input Fader Reverse: Reverses the direction of each respective input channel fader. Includes bi-color LED to indicate the status of the reverse function. When LED is red, the fader direction is reversed. Channel fader: Controls the input channel level. [. . . ] This unit has been designed and manufactured using quality components. Therefore, it is warranted to be free from defects in materials (limited as specified below), and workmanship for a period of twelve (12) months from the original purchase date. During this period, all service and parts necessary to repair a defect will be free of charge. This limited warranty applies to mechanical parts which are subject to wear and tear as specified: · Faders, specified durability: 15, 000 cycles · Rotary potentiometers, specified durability: 10, 000 cycles · Switches, specified durability: 10, 000 cycles Consequently, the parts listed above are warranted to be free from defects in materials and workmanship for a period of thirty days (30) days from the original purchase date. [. . . ]