User manual STANTON SK ONE

[. . . ] Remove the switch assembly and disconnect the cable coming from the mixer. Set the replacement switch assembly in the desired position and place the screws back in the top and bottom holes. STANTON MAGNETICS, LLC 2821 Evans St. Hollywood, FL 33020 (954) 929-8999 - Fax: (954) 929-0333 info@stantonmagnetics. com OWNER'S M A N U A L © 1999, Stanton Magnetics, LLC T RO U B LE S H O OT I N G Thank you for making Stanton your first choice in professional DJ mixers. This new, innovative family of mixers has been developed with input from the professional DJ community, bringing to the marketplace a previously unavailable, affordable combination of user-friendly, functional design, rugged construction, and professional quality features. [. . . ] · To prevent overheating, always provide your mixer with adequate ventilation air space. · Avoid stepping on your mixer's AC cord. Repeated compression of the cord may lead to electrical shorting. · To avoid damage due to AC voltage peaks, always disconnect your mixer from the power source during electrical storms. · Your mixer contains no user-serviceable parts. The manufacturer is not responsible for any damage or personal injury resulting from unauthorized user-servicing or modifications. In addition, the warranty will be void if any unauthorized service by the user is detected. Always return you mixer to an authorized Stanton dealer for servicing. The amplifier is turned up, but there is no signal. Faulty output connections Improper level adjustment. No signal in headphones. Improper connection. Improper level or cue mix settings. D E S C R I P T I O N O F F U N C TI O N S normal (20dB), or long (30dB) fade. Channel fader: Controls the input channel level. Crossfader: Fades the master output between channels 1 and 2. Master level control: Controls the overall signal output level. Crossfader Curve adjustment: Adjusts the shape of the crossfader curve from a quick cut for scratching and cutting to a longer fade for mixing. Crossfader Reverse: Reverses the direction of the crossfader. Bi-color LED indicates the status of the crossfader reverse function. When LED is green, the crossfader is normal. When LED is red, the crossfader direction is reversed. Headphone level control: Controls the overall headphone output level. It is recommended headphones with an impedance rating of 200 ohms or less be used for maximum volume. Cue pan: Fades the headphone output between channels 1 and 2, effectively allowing the user to preview a mix. 1. Gain control: Controls the input sensitivity of each channel. EQ: Individual controls for low and high frequency equalization with (+9/-26 dB) Any changes made to EQ settings will change the overall output level. Pan control: Controls left/right output balance of each channel. [. . . ] Record out connects to tape recorder, mini disk recorder, etc. Outputs: Rec and unbalanced master outputs. TE C H N I C A L S P E C I FI C AT I O N S Line inputs: Phono inputs: Master output: Record output: Headphone output: Frequency Response: Tone Control : Gain Control: S/N Ratio: T. H. D: Dimension(LxWxD): Weight: 2 (RCA), 150 mV / 27K ohm 2 (RCA), 3 mV / 47K ohm 1 (1/4" TRS Balanced/RCA unbalanced), 775 mV / 1K ohm 1 (RCA), 245 mV / 10K ohm 1 (1/4 inch), 32 - 200 ohms recommended 20 Hz - 20 kHz, +/- 2 dB + 9/-26 dB (Hi, Low) 0-20dB Less than 70dB less than 0. 2% 13 6/8" x 7 2/8" x 4" ( 350 x 184 x 102 mm) 7 lbs (3. 2 Kg) WA R R A N T Y This unit has been designed and manufactured using quality components. Therefore, it is warranted to be free from defects in materials (limited as specified below), and workmanship for a period of twelve (12) months from the original purchase date. During this period, all service and parts necessary to repair a defect will be free of charge. [. . . ]