User manual STB SYSTEMS VELOCITY 4400

[. . . ] On-Line User's Guide © STB Systems, Inc. 1998 1651 North Glenville Richardson, Texas 75081 (972) 234-8750 Published in U. S. A. No part of this publication may be reproduced by any means without prior written permission from STB Systems, Inc. VELOCITY 4400 and STB VISION 98 are trademarks of STB Systems, Inc. [. . . ] At the "Display Type" dialog box, click on the "Change" button. At the "Change Display" dialog box, click on the "Have Disk" button. At the "Install From Disk" dialog box, type "X:\NT40" (without the quotes) where X is the CD-ROM drive letter and then click "OK". When Windows NT 4. 0 identifies the device as "STB VELOCITY 4400 ", click "OK". The "Third-party Drivers" dialog box will then open, notifying you that you are about to install a third-party driver. Click on the "Yes" button to proceed. TOC Table of Contents Back Forward On-Line User's Guide 10. When copying is complete click "OK" and then "Close" on the "Display Type" dialog box. Close "Display Properties" and restart your system for the changes to take effect. After you system restarts, a dialog box will open to inform you that you need to use the "Display Properties" dialog box to select your initial settings for the new display device. Open the "Display Properties" dialog box to the "Settings" page and select the display options that you require. Close the "Display Properties" dialog box and follow any other on-screen instructions that may appear in order to activate the new display settings you have chosen. The installation of the Windows NT 4. 0 display drivers for your VELOCITY 4400 card is now complete. TOC Table of Contents Back Forward On-Line User's Guide VIDEO OUTPUT OPTIONS Some versions of the VELOCITY 4400 card have video outputs. These video outputs are optional equipment and may not be included on your card. The Composite Video Output Connector (RCA jack) on the mounting bracket of the VELOCITY 4400 adapter allows you to use a standard television set as the monitor for your computer. The output of this connector is in the standard NTSC format for video line signals. To maintain compatibility with the NTSC standard, the output of this connector supports resolutions of 640x480 and 800x600 at a refresh rate of 60Hz. The S-Video Output Connector (Mini-DIN jack) on the mounting bracket of the adapter allows you to connect a television set that is compatible with the S-Video format to use as your computer's monitor. The S-Video format also supports resolutions of 640x480 and 800x600 at 60Hz. While your computer is booting up it attempted to detect the monitor that is attached to the Monitor Connector of the adapter. If it detects no monitor attahced, then it will automatically enable both of the other video output connectors, delivering the computer's output for display on your television set. The video connectors can also be enabled or disabled through software. Please refer to Section 3, TV Output Controls, for more information on controlling these outputs. REFRESH RATE OPTIONS The STBVISION 98 display drivers provide you with direct control of the vertical refresh rates used in Windows graphical environment. [. . . ] The BIOS version is noted on the ROM BIOS label on the VELOCITY 4400 adapter. STB VELOCITY 4400 software driver version ______________________________________________ Like the BIOS, the VELOCITY 4400 Driver CD has programs we update from time to time. The version number is printed on the diskette label. TOC Table of Contents Back Forward On-Line User's Guide Motherboard make, BIOS version and chipset Who makes your motherboard?Speed and type of your computer Tell us the processor type (e. g. [. . . ]