User manual STRONG 5 IN 1

[. . . ] The key-in time is 10 seconds (see point 4). Use following device keys: for your TELEVISION, for your VIDEO RECORDER, for your DVD-PLAYER, for your SATELLITE RECEIVER – default setting for STRONG SRT 6125, 6155, 6355 for your second device: SATELLITE RECEIVER / CABLE BOX. If the code number you inserted is correct (present in the database) then the LED light will turn OFF immediately. If this number does not exist then the LED is still ON. [. . . ] & key Note: If the LED does not blink at all, the corresponding code for the first digit is 0. 2. 4. Count the number of times the LED blinks and record this number. Continue by pressing & and count the number of times the LED blinks then record this number. Continue by pressing & and count the number of times the LED blinks then record this number for the third digit. You have now identified the 3-digit code from the search. Key does not blink at all, it means the 1st digit of the code number is [0], key blinking twice means 2nd digit is [2], key blinking 8 times means 3rd digit is [8], therefore the code number is 028. Example: If you think that the searching process is too slow, you can advance the database searching process by pressing button. Your Code Numbers For future reference please record your CODE numbers in the fields for your devices: TV VCR DVD-Player STB 1 STB 2 2 www. strongsat. com GB Basic functions: 1. STANDBY ON/OFF – Switches the device ON or OFF. LED indicator – Blinks when remote control buttons are pressed. Press this button to control your TV set. SET – Used for programming other devices, such as VCR/DVD-Player etc. Press this button to controlyour second STB. Press this button to control your DVD-Player. STB1 – Default button for Strong SRT 6125/6155/6355 digital satellite receivers. TV/RAD – Switches between TV or Radio mode in STB1 mode. FAV – Displays the list of favourite channels in STB1 mode. Mute – Enables or disables the sound Mutes in all modes 12. SUB – Display subtitles of broadcast in STB1 mode Used for stepping through the channels or navigating within the OSD Menus in STB1 mode. CHANNEL Up/Down – Used for stepping through the channels or navigating within the OSD Menus in STB1 mode. VOL Left/Right – Used for adjusting the volume or for navigating within the OSD Menus (left / right) in all modes. OK – In SAT1 mode: To confirm actions in the menu systems. In view mode: Displays the current channel list. In VCR/DVD-Player mode: Selects PLAY function. [. . . ] Yellow – STB1 mode: The yellow colour is used for various functions in the menu. Red – STB1 mode: The red colour is used for various functions in the menus. Green – STB1 mode: The green colour is used for various functions in the menu. Buttons 26-29 – In Teletext mode: Functions according to Teletext content. [. . . ]