User manual STRONG 8105

[. . . ] DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES: „„ direct sunlight or any other equipment that generates heat; to rain or intense To moisture; to intense vibration and to any shock which may cause permanent damage to your receiver or to any magnetic objects, such as loudspeakers, transformers,  etc. It may cause a fire or an electric shock. Do not touch a power cord with wet hands. „„ When the receiver is not used for a long period of time, you should unplug the power cord from the wall socket. [. . . ] Despite that, these channels are still available from the channel list. To mark channels for skipping, press GREEN while in TV Channel List. The Skip symbol on the top of the screen will move up to indicate that the Skip function is selected. Use pq to select the desired channel and press OK to mark or unmark it for skipping. Channels set for skipping will be marked with the  symbol. Once all changes are made, press EXIT twice. Select Yes to save the changes or No to discard. 7. 1. 5 Moving channels To enable the Move function, press YELLOW while in TV Channel List. The Move symbol on the top of the screen will move up to indicate that the Move function is selected. Use pq to select the desired channel and press OK to select it. You can now move the selected channel up or down the channel list using pq. Once the channel is on the desired position, press OK again. The receiver asks you to enter the pin code. Once you have marked all channels you wish to delete, press EXIT twice. A confirmation banner will be displayed. Select Yes to delete the marked channels or No to cancel. Basically, the operation of the Radio Channel List is the same as in the TV Channel List. The only difference is that in Radio Channel List there is no video information, so it will always display the radio logo at the right preview screen. 7. 1. 7 Radio Channel List 7. 1. 8 Delete all Use this menu to delete all stored channels. The receiver asks you to enter the pin code. In the confirmation window select Yes with tu and press OK to delete or select No to cancel. Warning! The Delete all function will permanently delete all current channels and all favourite lists from your receiver, and you are not able to leave the menu until you search for channels again. 7. 2 Installation 7. 2. 1 Auto Scan Use pq to select Installation and press OK or u to advance. Select Auto Scan with pq and press OK to enter. Use tu to toggle between FTA Only Yes or No. When FTA Only is set to Yes, scrambled channels won’t be stored in the channel list. [. . . ] Press EXIT to leave. 7. 6. 3 DVR HDD Information 7. 6. 4 HDD Format The HDD format menu allows you to format the connected USB device. Warning!  Formatting will permanently delete ALL data stored on the connected device. Please make a backup copy of all data you wish to keep before entering the HDD Format menu. STRONG cannot be held responsible for loss of data from USB devices used with this receiver. [. . . ]