User manual STRONG SRT 3926 BROCHURE

[. . . ] It is advised that first-time and experienced users read this manual in order to safely install the receiver. Strong has supplied this product with the most recent innovations of software and hardware. Strong reserves the right to make changes in production to the software used by your satellite receiver without prior notification. In order to maintain and ensure that your receiver is compatible and updated with the most recent software technology, we recommend that you visit our website to check the latest software. Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features & Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Equipment Set-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2. [. . . ] A heart will appear behind the channels' name. If the Red button is pressed again the selected channel is un-selected from FAV 1 Favourite list. Press the Exit button until you go back to main menu. You can view the Favourite list you set by pressing the Fav button while you are watching TV or listening to a Radio channel. 6. Reset Channels Menu You can delete all the channels that you have scanned by applying the following steps: 1. Using UP/DOWN keys, select "Channel 3. Using UP/DOWN keys, select "Reset Channels" and press OK. All the channels will then be deleted. 25 26 5. 1. 2 System Configuration Menu To install your receiver to your personal preferences, go to "System Configuration" menu. Then please apply the following steps: 1. Using UP/DOWN keys, select "System Configuration" and press OK. · Preferences: You can change the language of the menu, audio language, subtitles language, Time Zone, Time banner period and Smart card subscription update in stand-by mode applying the following steps: 1. Select "Menu Language" and press the Right button to choose the language you want. Current PIN: Enter `1111' New PIN: Enter a new PIN Retype PIN: Enter the same new PIN 1. 5. 1. 3 Installation Menu All settings that are related to TV, Dish, LNB and Satellites are within this menu. The installation menu contains "Antenna Setup", "Diseqc1. 2 Setup", "Manual Scan" sub-menus. To access the different sub menus, apply the following steps: It is recommended that you read the manual and installation instructions of your LNB, your DiSEqC switch, your 0/12V switch and your Positioner before you start setting up your receiver. Antenna Setup Menu: To set up your antenna, please apply the following steps: 1. Using UP/DOWN keys, select "Installation" and press OK. Using UP/DOWN keys, select "Antenna Setup" and press OK. Use the UP/DOWN keys on your remote to select an item and use the LEFT/RIGHT buttons to set up any values. · · · Antenna: Select an index for the satellite you wish to scan Satellite: Select the satellite you wish to scan from the satellite list. LNB: Select the LNB type from Universal 1 ~ 3, 5150, 9750 or 10750. If you have different LNB type ­ select `0" and type the local oscillator value. In UNI1=9750/10600 MHz, UNI2=9750/10700MHz, UNI3=9750/10750 MHz 13/18V: Select auto, 13/18V, 13V or 18V for LNB. [. . . ] (Short circuit in the LNB cable) The batteries of the remote control are not inserted or exhausted. SC2005(LSI-LOGIC) 1Mbyte(up to 8Mbyte) 8Mbyte(up to 16Mbyte) 2Mbyte(up to 4Mbyte) 8Kbyte Digital Channel : 3000 Up to 64 3. MPEG Transport Stream & A/V Decoding Transport Stream MPEG-2 ISO/IEC 13818 Transport Stream Specification Profile Level MPEG-2 MP@ML Input Rate Max 90Mbit/s Aspect Ratio 4:3, 16:9 Frame Rate 25Hz for PAL, 30Hz for NTSC Teletext Through VBI Audio Decoding MPEG/MUSICAM Layer I & II Audio Mode Single channel/Dual channel Joint Stereo/Stereo Frequency Response 20kHz~20kHz +/-2dB, 60kHz~18kHz +/-0. 5dB Sampling Rate 32, 44. 1, 48kHz 4. Smart card interface Number of card readers Compatibility The remote control is not working. Check whether the batteries are inserted correctly in your remote control. Check the batteries, and if they are exhausted, replace them. 2 card readers ISO 7816, GSM11. 11 and EMV (payment systems) 39 40 5. [. . . ]