User manual STRONG SRT 4012 BROCHURE

[. . . ] Heat Warnings - Read carefully and follow all warning labels on the product and those described in the instructions. Follow Instructions- Follow all instructions provided with this product. Cleaning - Always unplug this product from the wall outlet before cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this product. [. . . ] TV/RADIO Toggles between TV or RADIO mode 19. TXT Shows Teletext on OSD (On Screen Display) if applicable 20. COLOURED BUTTONS for Teletext functions 4. 0 FIRST TIME INSTALLATION If you use the receiver for the first time, the "Easy Install" menu appears. Use the tu buttons to change settings for setup of Region, OSD Language and Antenna Power and the pq to select. Then use the pq buttons to move focus to Search and press OK to proceed with the automatic channel scan. 5. 0 MAIN MENU 5. 1 Channel In viewing mode always press MENU to enter the Main Menu. It consists of following submenus: Channel, Installation, Setup, Tools and Media+ 1. Use the pq buttons to select Channel and press OK to enter. Use the pq buttons to highlight the desired item and press OK to select. Press EXIT to exit. Note: You can also press OK in TV mode to enter channel list. 5. 1. 1 TV Channel list 1. In Channel submenu select TV Channel List with the pq buttons and press OK to enter. 7 English PART 1 · English 2. Sorting in Alphabetical Order. PART 1 · English Name (Z-A): FTA: Lock: Sorting in Alphabetical Order. First in the list will be Free-To-Air channels. First will be listed all unlocked and then the locked channels at the end. 5. 1. 1. 4 Move Press the [4] button to activate the Move function. The selected channel will be marked in a symbol, use the pq buttons to move the selected channel to the desired position. With the pq buttons select Antenna setting and press OK to enter. If On is selected, the receiver will provide 5 V antenna power (for active antennas). Press EXIT button to exit. 5. 2. 3 Antenna Setting 1. 4. 5. 2. 4 LCN Mode If LCN (Logical Channel Number) is activated and LCN signal is provided by operator, then channels will be stored at operator defined order. You can activate/ deactivate the LCN function by setting the "LCN Mode" to ON/OFF. 5. 3 Setup This menu allows you to set OSD Language, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock. Press pq buttons to highlight desired menu and press OK button to enter the setting menus. Then press pq buttons to select desired item. [. . . ] Select "Media+" and press OK button to enter Media+ menu. Press pq buttons to highlight desired menu and press OK button to enter. Use the two button rows in bottom of RCU for Player operation. 13 English PART 1 · English 5. 5. 1 Media Player This function allows you to play MPEG-2, Audio and Photo files from connected USB device 1. [. . . ]