User manual STRONG SRT 4356 PDR

[. . . ] Heat Warnings - Read carefully and follow all warning labels on the product and those described in the instructions. Follow Instructions- Follow all instructions provided with this product. Cleaning - Always unplug this product from the wall outlet before cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this product. [. . . ] If mode of selected dish is DiSEqC 1. 2 then value cannot be stored (in case dish position for selected satellite was not stored) or in range from 1 to 64 if position has been stored. Select item and press OK to setup positioner. See chapter 5. 2. 1. 1 for more details about Positioner setup. If mode of selected dish is GOTO X then value is GOTO X. Select item and press OK to setup GOTO X function. n Transponder: Move focus of the menu to this item and press OK. List of transponders of selected satellite will appear at right side of the screen. You can select transponder in order to check signal strength and quality of reception. Transponder list contains predefined transponders. If you need to modify transponder list please use menu Edit satellites as described in chapter 5. 2. 3. If you need to scan specific transponder then use Manual scan as described in this chapter below. 15 English PART 1 · English Network search: if this item is set to "No" then receiver will search for the channels that are available from preset transponder list of selected satellite. n Set limit: Use tu buttons to select East or West limit of dish movement range. Step by step recommendations of position setup. n Select reference transponder in order to check signal strength and quality during position setup. n If you do not know current direction of your dish then move menu focus to Centre position item and press OK. Knowing your location longitude you may understand direction where necessary to move dish in order to reach position of selected satellite. For example: your longitude is 5° East and you want to setup dish position for Astra 1C, 1E (19° East). Then, from centre position, you need to move dish to East direction by pressing to t button. If your longitude is 25° East then, in order to setup dish position for Astra 1C, 1E (19° East), you need to move dish in West direction (from centre position) by pressing to u button. n To setup roughly position of the dish set Movement speed to Fast. Then move menu focus to Move item of the menu and by short presses to t or u buttons move dish to necessary direction. Check signal strength and quality indicators. [. . . ] You can activate Fast Forward or Fast Rewind during Timeshift by pressing the 7 or 8 buttons. Another pressing of these buttons will change the speed (FF: x2, x4, x8; FR: x1, x2, x4, x8). To choose a specific position or scene in Timeshift mode press INFO and choose the desired position with the tu buttons. To leave Timeshift press <(Stop) button. 26 PART 1 · English A. 1 TROUBLESHOOTING There may be various reasons for the abnormal operation of the receiver. [. . . ]