Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual STRONG SRT 4402. We hope that this STRONG SRT 4402 user guide will be useful to you.
Lastmanuals help download the user guide STRONG SRT 4402.
Detailed instructions for use are in the User's Guide.
[. . . ] Safety Instructions · Be sure to read this User's Manual before starting the operation of the receiver · Never open the cover. It is dangerous to touch the inside of the receiver due to possible electric hazard. · When the receiver is unused for a long time, unplug the power cord from the wall outlet. · Do not use a damaged power cord that may cause a fire or an electric shock. [. . . ] If it is first time using a receiver, you should set parameters for system configuration. After displaying the login screen, press the MENU button. The <screen1> will be appeared.
Figure 11. Connecting to SMART CARD Warning <screen 1> <Menu Information> The menu consists of main-menu and sub-menu, as you see in the <Screen 1>. Main-menu has items and each main-item has its sub-menu items.
<screen 2>
17
18
Setting and Operations 4. 2 Basic Settings To install the receiver properly you have to perform Antenna Setup. When you have finished the setup procedure, you can start watching TV or is turning to Radio. Press the MENU button to display the main menu. From the main-menu<Screen 1>, press the OK button on the Installation to display sub-menu. <Screen 2> <DiSEqC 1. 2 Setup> If you use positioner Antenna, you can set East/West limit of your dish in the DiSEqC 1. 2 SETUP menu at first. If you don't use positioner antenna, skip this section. Press the OK button on the DiSEqC 1. 2 Setup menu of Installation. And then, <Screen 3> will appear as displayed below.
Setting and Operations 2. If you selected "on" item of ON/OFF mode, you can setup position. You can input characters from the keypad box. Press EXIT to cancel edit, and press OK on the edit field or press MENU on the keypad box to confirm edit.
<screen 7> Before start to scan antenna, you should set values of antenna configuration parameters.
<screen 9>
21
22
Setting and Operations 5. If you want to scan each transponder or edit transponder list. <Screen 7>
Setting and Operations <Manual Scan> You can scan TP frequency and channel manually in the Manual Scan menu. Press the OK button in the Manual Scan menu of Installation. <screen 6>
<screen 10> Press the OK button to scan the selected transponder. You can change polarity, frequency and symbol rate of a transponder, and edit transponder-name by pressing OK at "TP Name" field.
If you want delete TP, Press BLUE button in RCU.
<screen 12> First, select the satellite name in the "Satellite" item. Select or enter the accurate value frequency, polarization, symbol rate. Finally, Press the OK button to start channel scan. Also you want to channel scan, Press the button and change to "channel scan" on the "scan mode" field. <Screen 13>
<screen 11>
If you want Insert TP, Press RED button in RCU. [. . . ] The receiver can't receive the signal. Incorrect values of some tuner parameters. Wrong direction of the dish
Connect the Audio/Video output of the receiver to TV correctly. Check the antenna cable, replace the cable, or connect the cable to the receiver tightly. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE STRONG SRT 4402
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual STRONG SRT 4402 will begin.
