User manual STRONG SRT 5222

[. . . ] Strong has supplied this product with the most recent innovations of software and hardware. Strong reserves the right to make changes in production to the software used by your satellite receiver without prior notification. 3 PART 1 · English 1. 1 Safety Instructions: Warning: DO NOT INSTALL YOUR RECEIVER In a closed or poorly ventilated cabinet; Directly on top of or under any another equipment; On a surface which might obstruct the ventilation slots. DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES: To direct sunlight or near any other equipment that generates heat; To rain or intense moisture. To any shock which may cause permanent damage to your receiver; To any magnetic objects, such as loudspeakers, transformers, etc. ; To intense vibration. It is dangerous to touch the inside of the receiver due to high voltage currents and possible electrical hazards. [. . . ] Using UP/DOWN keys, select the language in which you want your menu to be displayed and press OK. The screen of the menu will change to the language of your choice. You can also choose your preferred first audio language, second audio language and the subtitle language by applying the same steps. Press BACK until you return to the main menu. 24 PART 1 · English Connection Settings: You can set the connection settings to your personal preferences. Check your TV and VCR user manuals for the correct settings. You can change your Connection settings by applying the following steps: 1. Select "Connection" and press OK or the Right button. TV Mode: Press OK or the Right button and set your TV mode to "Multi", "PAL" or "NTSC". Video Output: Press OK or the Right button and set your Video mode to "CVBS" (Composite video) or "RGB" (preferred option if your TV set is compatible with it). TV mode: Press OK or the Right button and set your screen mode to "4 : 3" , "4 : 3 Letterbox", or "16 : 9" format. Audio Output : Press OK or the Right button and set your audio output to "Stereo", "Left" or "Right" (left or Right is for mono TV sets) S/PDIF Output: Press OK or the Right button and activate your S/PDIF output on the back of your receiver, so you can connect it to a digital Audio amplifier using an coaxial cable. Using UP/DOWN keys select the correct one, and the receiver will automatically show the current time in your country. To set the time manually: Select GMT usage: Press OK or the Right button and use the UP/DOWN buttons to set the GMT usage to "off". The time setting menu will now activate the bottom two fields of the menu. 26 PART 1 · English Adjust Time: Use your Numeric buttons [0-9] to set the local time. Select Set Date: Press OK or the Right button and set the date the way you have set the time. Note: We advise you to use the GMT time settings, if you use the manual time settings, the time will be lost after the unit has been disconnected from the mainpower. Press the BACK button until you go back to the Main Menu. Power on Channel: This function allows you to set the channel you want when the receiver turns on. To set the power on channel, apply the following steps: 1. Select Power on Channel and press OK or the Right button. Last Channel: The receiver will start-up with the channel that you viewed before turning the receiver off. [. . . ] Color Buttons Within the Videotext mode the color buttons follow the color codes of the broadcaster. In the menu follow the color codes for various functions. 0 - 9 Numeric Direct entry of numerical functions in the menus or in channels selection. 39 PART 1 · English A. 1 Trouble Shooting Occasionally receivers can hang-up (just like a PC) so you are recommended to reset the receiver by disconnecting it from mains power. Wait 30 seconds and connect to mains power again and now check if the unit is working as expected. [. . . ]