User manual STRONG SRT 5245

[. . . ] Digital Satellite and Terrestrial Receiver SRT 5245 User Manual Immagine simile ENVIRONMENTAL ISSUES Strong is committed to reducing the impact of its products on the environment. Electronic product recycling Do not dispose of this product with your domestic rubbish. Packaging When disposing of this product packaging, please ensure that it is recycled. At the end of its useful life, this product contains materials which when processed correctly can be recovered and recycled. By participating in the responsible recycling of this product you will be reducing the requirement for new raw materials and reducing the amount of material that would otherwise end up in landfill. When you purchase a new, similar product your retailer may offer to take this old one off you. Alternatively, you can take it to your local recycling centre. [. . . ] Satellite: move focus of the menu to this item. Press OK to display list of available satellites. Select satellite of your choice and press OK. If satellite doesn't exist in the list you should add it first using "Edit satellites" menu. Dish number: move focus of the menu to this item. Use buttons to select dish number to which above selected satellite belongs to. Press OK button to enter to Dish setup menu. Dish number "--" means that selected satellite do not belongs to any dish. Dish position: this item value depends from the mode of the Dish. n if mode of selected dish is "Fixed" then this item is not selectable. n if mode of selected dish is "DiSEqC 1. 2" then value can be "Not stored" (in case dish position for selected satellite was not stored) or in range from 1 to 64 if position has been stored. Select item and press OK to setup positioner. More details about Positioner setup read in chapter 5. 2. 1. 1. n if mode of selected dish is "GOTO X" then value is "GOTO X". Select item and press OK to setup GOTO X function. Transponder: move focus of the menu to this item and press OK. List of transponders of selected satellite will appear at right side of the screen. You can select transponder in order to check signal strength and quality of reception. Transponder list contains predefined transponders. If you need to modify transponder list please use menu "Edit satellites" as described in chapter 5. 2. 3. If you need to scan specific transponder then use Manual scan as described in this chapter below. Network search: if this item is set to "OFF" then receiver will search for the channels that are available from preset transponder list of selected satellite. [. . . ] Select first letter of the channel name that you need to find in the list and press OK. 20 PART 1 · English 6. 3. 2 Multi Pictures Press GREEN button to choose between 4 pictures or 9 pictures. 6. 3. 3 Selection of the list From view mode or channel list mode press LIST button and use pq buttons to select between "ALL channels" and one satellite or only terrestrial channels mode. From view mode or channel list mode press FAV button and use pq buttons to select favourite group of your choice. Press OK to confirm selection. [. . . ]