User manual STRONG SRT 55

[. . . ] PART 1 · English TABLE OF CONTENTS 1. 0 INSTRUCTION 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Features & Accessories 2. 0 CONNECTION 3. 0 YOUR RECEIVER 3. 1 Remote Control 4. 0 FIRST TIME INSTALLATION 5. 0 MAIN MENU 5. 1 Channel 5. 2 Installation 5. 3 Setup 5. 4 Tools 5. 5 Media+ 6. 0 OPERATION 6. 1 Changing Channels 6. 2 Accessing the Electronic Program Guide (EPG) 6. 3 Accessing the favourite channels A. 1 TROUBLESHOOTING A. 2 SPECIFICATIONS 2 2 3 3 4 5 5 6 6 6 7 8 9 11 12 14 14 15 15 15 16 English 1 PART 1 · English 1. 0 INSTRUCTION 1. 1 Safety Instructions This SCART Receiver has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions carefully. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. [. . . ] With the pq buttons select Antenna setting and press OK to enter. If On is selected, the receiver will provide 5 V antenna power (for active antennas). Press EXIT button to exit. 5. 2. 4 Logical channel numbering If LCN (Logical Channel Number) is activated and LCN signal is provided by operator, then channels will be stored at operator defined order. You can activate/deactivate the LCN function by setting the "LCN Mode" to ON/OFF. 5. 3 Setup This menu allows you to set OSD Language, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock. Press pq buttons to highlight desired menu and press OK button to enter the setting menus. Then press pq buttons to select desired item. Settings can be changed by pressing tu buttons. You can get better overview if press OK first. Now you can select desired setting by pq buttons and confirm it with OK. Press EXIT button to exit. 5. 3. 1 OSD Language 5. 3. 2 TV System This menu allows you to set OSD Language. This menu allows to setup different settings concerning your TV set. Display Mode: PAL/NTSC/AUTO Aspect Ratio: Use this menu to configure the screen aspect between: 4:3 PS (Pan&Scan), 4:3 LB (Letter Box) and 16:9 (Wide Screen) and AUTO Video Output: Switch the video output mode either to RGB or to CVBS 9 English PART 1 · English 5. 3. 3 Region and Time Here you can set your region and time zone. Region: This menu is used for changing the region setting. GMT Usage: This menu is used for usage of GMT. The options are: Off / User Define / By Region GMT Offset: This menu is valid only when selected "User Define" in GMT Usage menu. The GMT offset range is "-11:30 ~ +12:00", increasing by half hours progressively. Date/Time: "Date" and "Time" menus are valid only when selected "Off" in GMT Usage menu. Press OK then numeric button to change the date and time. Time Display: This menu allow to control whether the time is displayed on screen or not. The options are: Off/On. 5. 3. 4 Timer Setting In this menu you can set a programme timer or sleep timer. Programme timer Timer Number: You can set 8 timers Timer Mode: Off/Once/Daily/Weekly/Monthly Timer Service: TV Service/Radio Service Wake-up Channel: You can select a desired channel as wake-up channel. Month/Date/Day: Press pq buttons to select your desired month, date and day. [. . . ] You will see actual used Device and Partition displayed. Furthermore the available Capability in GB is shown. Press pq buttons to select File System and use tu buttons to change between FAT/ NTFS settings. 6. 0 OPERATION 6. 1 Changing Channels There are 4 ways of channel selection - stepping through the channel list, selection by number, from the on-screen channel list, and using the electronic programme guide (EPG). Stepping through the channel list To move through the channel list, press the pq buttons on the remote control. [. . . ]