User manual STRONG SRT 5505 MHP

[. . . ] Safety First Removing the decoder's cover may lead to a severe & potentially fatal electric shock. Whenever you disconnect the decoder from the power supply, always remove the power brick from the wall socket-outlet before you remove the other end of the lead from the power input connector on the back panel of the decoder. Never attempt to repair or reconstruct the decoder yourself. A serious electric shock may occur if this decoder is repaired, disassembled or reconstructed by an unauthorized person. [. . . ] This button is used to navigate through external MHP applications such as program guide, t-commerce, voting, etc 9 SRT 5505 mhp How to Set up Your Decoder Once you have connected you decoder properly and plugged it to the mains, the LED indicator on the front panel will light up. After several seconds the welcome screen is displayed and you will be asked to select the language. Language and Location setup The Language screen allows you to select the language for any information displayed on the screen. Press press or to highlight the on-screen language and to make your selection. Once you select and confirm the chosen language, the Country Selection screen appears. Select you country in the same way you selected the language and confirm your choice. Language selection Channel Search Once the country is selected and you have pressed , the channel search begins automatically. Once this procedure has been completed, you will be informed about the total number of channels found. If the channel searching procedure has not been concluded successfully, a respective error message appears. You can then press the button to go back to the Language screen or enter the Menu system where you will be able to access Installation and Help submenus. button to tune to the first TV Channel Search Help Provides access to more detailed help concerning your decoder's functionality and set-up when selecting the Help item from the Main Menu. To do so: press the button on your / remote and select the Help item with the buttons, then press to make a selection. The screen presented on the right will appear. You can now select the entry you are interested in the way described above. Help SRT 5505 mhp 10 Before Requesting Service Before requesting service for your decoder, please check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your behalf may eliminate the problem and restore proper operation. The most common problems that arise are related to cable connections. Make sure that your decoder is properly connected. To ensure that all the cables are in their place, disconnect and connect them again. If none of the remedies indicated in the table below solve the problem, consult your vendor. Installation issues Symptom Your decoder does not find channels. Remedy If you are using a directional aerial, make sure it is directed towards a digital TV transmitter and positioned correctly. Make sure that it is possible to receive digital terrestrial signal in your area. It is advisable to use a standard outdoor aerial, which normally have better characteristics than the indoor one. If you cannot resolve the problem easily you may need to have your aerial and installation tested by a professional. General issues Symptom The standby indicator on the decoder's front panel does not light up. [. . . ] There is no sound. Your decoder is in standby. This is indicated by a red Standby button on your remote indicator on the front panel. Some of the connections to your decoder may have worked loose. Check that your decoder is connected to the power source and correctly connected to your TV set. [. . . ]