User manual STRONG SRT 5855

[. . . ] Table of Contents 1. 0 Usage Safety Instructions Features & Accessories Safety Precautions Storage Equipment Set-up Your DVB-T Receiver 2. 1 Front Panel 2. 2 Rear Panel 2. 3 Basic Functions Remote Control Connections 3. 1 Connecting to your TV & VCR 3. 1. 1 Basic connection with a coaxial cable 3. 1. 2 Basic connection with a Scart cable 3. 1. 3 Advanced connection 3. 1. 4 Connection with Audio Cable RCA Connectors 3. 1. 5 Connection to a digital audio amplifier using the S/PDIF output 3. 1. 6 Connecting a remote eye (optional accessory) 3. 1. 7 Connecting a serial cable for downloading software Starting up 4. 1 Starting up for the First Time Basic settings 5. 1. 1 Main Menu 5. 1. 2 Channel Organizer Menu 5. 1. 3 The Timer Menu 5. 1. 4 The Installation Menu 5. 1. 4. 1 System Set-up Menu 5. 1. 4. 2 Channel Set-up 5. 1. 4. 3 Parental Lock ­ Changing PIN Code Pay TV ­ Subscription 6. 1 Putting your card into the receiver 6. 2 Activating the card Troubleshooting Glossary of terms Technical specification 1. 1 1. 2 1. 3 1. 4 1. 5 2. 0 3 4 5 6 7 7 8 8 8 10 12 12 12 12 12 13 13 13 14 14 14 15 15 15 16 18 18 22 23 25 25 25 26 28 30 3. 0 4. 0 5. 0 6. 0 A1 A2 A3 2 Thank you for choosing this Strong Digital Terrestrial Television Receiver. This receiver is of our latest development and it is designed to be capable of upgrading its software through the PC. It is highly recommended that you read this manual carefully to safely install your receiver and to achieve its optimum performance. 1. 0 Usage This user manual is applicable for Strong SRT 5855 Digital Terrestrial Receiver and its related accessories. It is advised that first time and experienced users read this manual in order to safely install the receiver. [. . . ] Tip: You have to select the channel, starting time, and ending time settings if the Timer mode is "Time interval". An error message will appear if any of the settings are incorrect. 17 5. 1. 4 The Installation Menu (Please see inside cover Screen 1) All settings that are related to TV channel search are within this menu. The installation menu contains several sub menus such as "System Set-up "Antenna Setup", "Channel Set-up" and "Parental Lock". To access the different sub menus, apply the following: 5. 1. 4. 1 System Set-up Menu (Please see inside cover Screen 8-22) Please note that for first time install all these parameters have been preset for use in the UK on a standard 4:3 ratio colour TV screen. To install your receiver to your personal preferences, go to "System Set-up" menu. Then please apply the following steps: 1. Using UP/DOWN keys, select "Installation" and press SELECT. Using UP/DOWN keys, select "System Set-up" and press SELECT. Language Settings: You can change the language of the menu, audio and subtitles by applying the following steps: 1. Select "Language Settings" and Press SELECT or the Right button. You can also choose your preferred first audio language, second audio language and the subtitle language by applying the same steps. Press BACK until you return to the main menu. 18 TV/VCR Settings: You can set the TV/VCR settings to your personal preferences. Check your TV and VCR user manuals for the correct settings. You can change your TV/VCR settings by applying the following steps: 1. Select "TV/VCR Settings" and press SELECT or the Right button. TV Mode: Press SELECT or the Right button and set your TV mode to "Multi", "PAL" or "NTSC". Video Mode: Press SELECT or the Right button and set your VCR mode to "CVBS" (Composite video) or "RGB" (preferred option if your TV set is compatible with it). Screen Mode: Press SELECT or the Right button and set your screen mode to "4:3 Full Screen", "4:3 Letter" or "16:9". Audio Output: Press SELECT or the Right button and set your audio output to "Stereo", "Left only" or "Right only" (left or Right is for mono TV sets) S/PDIF Output: Press SELECT or the Right button and activate your S/PDIF output on the back of your receiver, so you can connect it to a digital Audio amplifier using a coaxial cable. VCR Scart: Press SELECT or the Right button and set the scart output to "Auto" or "STB" (Set Top Box). If set to "STB", the VCR scart signal is not automatically looped through. Only when using an active antenna this function must be switched "ON". [. . . ] Retuning as if for the first time. connections between connected correctly to the TV and to the No picture and sound. Receiver "hang-up". No sound. The receiver or TV is in "MUTE" mode. Press the MUTE button on the remote control unit of your receiver and TV. 26 No sound or picture. Problem in scart cable connections between receiver and TV. The receiver displays This is normal, the the message "No or bad signal" during bad weather conditions. bad weather is interfering the signal of the antenna Firmly press the scart connectors on the backside of the TV and receiver. [. . . ]