User manual STRONG SRT 6004 EVOLUTION

[. . . ] Digital Free-To-Air Satellite Receiver SRT 6004 /6011 User Manual Picture similar PART 1 · English TABLE OF CONTENTS 1. 0 INTRODUCTION 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Features & Accessories 2. 0 YOUR RECEIVER 2. 1 Front Panel 2. 2 Rear Panel 2. 3 Remote Control 3. 0 CONNECTIONS 3. 1 Connecting to TV & VCR 3. 2 Connecting to Digital Audio Amplifier 3. 3 Connecting to Satellite Dish 3. 4 Connecting to serial cable for downloading software 4. 0 STARTING UP 4. 1 Language Selection 4. 2 Select Satellite 4. 3 Antenna mode 5. 0 MAIN MENU 5. 1 Channel Organiser 5. 2 Installation 5. 3 System setting 5. 4 Timer 5. 5 Game 5. 6 Calendar 6. 0 WATCHING TV AND LISTENING TO THE RADIO 6. 1 Program Information 6. 2 Mosaic (Nine picture view) 6. 3 EPG (Electronic Program Guide) 6. 4 Changing channel list mode between TV, Radio and Favourite 6. 5 Selection Audio Language 6. 6 TELETEXT function 6. 7 Subtitles function A. 1 TROUBLESHOOTING A. 2 SPECIFICATIONS A. 3 GLOSSARY OF TERMS 2 2 3 3 4 5 5 5 6 7 7 7 7 8 8 8 8 8 9 9 10 11 14 15 15 16 16 16 16 16 17 17 17 17 18 20 English 1 PART 1 · English 1. 0 INTRODUCTION 1. 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: n In a closed or poorly ventilated cabinet; directly on top of or under any another equipment; on a surface which might obstruct the ventilation slots DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES: To direct sunlight or near any other equipment that generates heat; to rain or intense moisture; to intense vibration and to any shock which may cause permanent damage to your receiver or to any magnetic objects, such as loudspeakers, transformers, etc n Do not use a damaged power cord. It may cause a fire or an electrical shock. Do not touch a power cord with wet hands. It may cause an electric shock n Never open the cover. [. . . ] Polarity: Select the Polarity of the new transponder. Edit Transponder: In this menu, you can edit a transponder in the system. Press the YELLOW button, the Edit Transponder sub-menu will appear. This menu is similar to Add Transponder menu. Delete Transponder Press the BLUE button to delete a transponder. Press LEFT/RIGHT to select OK, press the OK button to confirm. 5. 3 System setting In this menu, you configure the system, such as Language Setting, OSD style, Parental Control, TV Settings and Time Setting. 11 English Delete satellite If you want to delete a satellite, press the YELLOW key. Select OK and press the OK key to confirm. PART 1 · English 5. 3. 1 Preference 5. 3. 1. 1 Language Setting You can change the language of the OSD, preferred Audio and Subtitles. Use UP/DOWN to select the OSD language, Audio language or Subtitles language. Press OK or Right to enter the language list and Press UP/DOWN to select the language. Press OK to confirm. 5. 3. 1. 2 TV settings You can set the TV mode, Screen mode and Video output. TV mode In TV mode Screen press OK or RIGHT to select mode, press OK to confirm. If you don't know which standard your TV has, please select AUTO. n Screen mode In TV format Screen press OK or RIGHT to select 4:3 or 16:9, press OK to confirm. n Video output In Video output Screen press OK or RIGHT to select CVBS or RGB, press OK to confirm. n 5. 3. 1. 3 Time Settings If a broadcaster provides GMT, you can set the time using GMT, or set your own time by yourself. If the GMT usage is ON then you have to set the Time Zone. If you set GMT Usage to OFF, Set Data and Set Time item are displayed. To set the time value manually, move the cursor to the time item and use the numeric buttons on the remote control. 5. 3. 1. 4 Set Factory Default Please be careful when using this function, because it will erase all the data and parameters you may have set earlier to your receiver. Once you set the factory default you will have to re-install your preferences and re-scan your channels. To reset your receiver to factory default, apply the following steps: Select Set Factory default and press OK. Confirm warning message with OK and press the OK key, the receiver will return to its factory default state, and all user data will be deleted. NOTE: Your PIN code will change back to the factory setting "0000". 5. 3. 2 OSD Style In this menu, you can set the Menu Colour, Transparency Level and Border Pattern. 5. 3. 3 Parental Control In this menu, you can set Channel Lock status (ON or OFF), the Menu Lock status, Parental Setting and change the PIN code. The default PIN code is 0000. 12 PART 1 · English 5. 3. 3. 1 Channel Lock English 13 Set the system Channel Lock to ON or OFF. [. . . ] Disconnect receiver from main power Check your cable system. Check whether the batteries are inserted correctly in your remote control. Check the batteries, and if exhausted replace the batteries in the remote control. Message "Antenna Power Overload" displayed on TV Receiver detected short cut in your cable system The remote control does not work The batteries of the remote controller are not inserted or exhausted A. 2 SPECIFICATIONS 1. Tuner and demodulator Input frequency: Input impedance: Input level: LNB power supply: Waveform: Symbol rate: Viterbi rate: Reed Solomon decode: 950 ~ 2150 MHz 75 -65 dBm ~ -25 dBm 13/18 V ±0. 5 V, Max 500 mA, overload protected QPSK 2 ~ 45 MS/s K=7, R=1/2, 2/3, 3/4, 5/6, 7/8, auto 204, 188, T=8 2. [. . . ]