User manual STRONG SRT 6011

[. . . ] Digital Free-To-Air Satellite Receiver SRT 6011 User Manual Picture similar SAFETY INSTRUCTIONS Grounding, Polarization -- If this product is used with a specified AC adapter, the adaptermay be equipped with a polarized alternating current line plug (a plug with one blade wider than the other). This safety feature allows the plug to fit into the power outlet only one way. If you cannot insert the plug into the wall outlet, pull it out, reverse it, and then reinsert it. If the plug still fails to fit, contact an electrician and have the receptacle replaced n Protecting the Power Cord -- The power supply cord should be placed so it will not bewalked on. [. . . ] 5. 2. 3 Manual Scan In this menu, you can scan single transponder, add a new transponder, edit the transponder or delete the transponder. You can switch between satellites with the RED button, Scan transponder: Use UP/DOWN buttons to select the transponder. Add Transponder: In this menu, you can add a new transponder to the system. Press the GREEN button, the Add Transponder sub-menu will appear. Frequency: input the frequency of the new transponder. Symbol Rate: input the symbol rate of the new transponder. Polarity: Select the Polarity of the new transponder. Edit Transponder: In this menu, you can edit a transponder in the system. Press the YELLOW button, the Edit Transponder sub-menu will appear. This menu is similar to Add Transponder menu. Delete Transponder Press the BLUE button to delete a transponder. Press LEFT/RIGHT to select OK, press the OK button to confirm. 5. 3 System setting In this menu, you configure the system, such as Language Setting, OSD style, Parental Control, TV Settings and Time Setting. 10 PART 1 · English 5. 3. 1 Preference 5. 3. 1. 1 Language Setting You can change the language of the OSD, preferred Audio and Subtitles. Use UP/DOWN to select the OSD language, Audio language or Subtitles language. Press OK or Right to enter the language list and Press UP/DOWN to select the language. 5. 3. 1. 2 TV settings You can set the TV mode, Screen mode and Video output. n TV mode In TV mode Screen press OK or RIGHT to select mode, press OK to confirm. If you don't know which standard your TV has, please select AUTO. n Screen mode In TV format Screen press OK or RIGHT to select 4:3 or 16:9, press OK to confirm. n Video output In Video output Screen press OK or RIGHT to select CVBS or RGB, press OK to confirm. 5. 3. 1. 3 Time Settings If a broadcaster provides GMT, you can set the time using GMT, or set your own time by yourself. If the GMT usage is ON then you have to set the Time Zone. If you set GMT Usage to OFF, Set Data and Set Time item are displayed. [. . . ] MPEG is a standard method for digital transmission of video and audio. A network which is also known as a bouquet is a set of channels that is offered by a single broadcaster. Referring to the Phase Alternate Line colour system adopted by European broadcasters. The transmitted packages have identifiers (PID) that tells the receiver what to do with the received information. [. . . ]