User manual STRONG SRT 6016

[. . . ] Digital Free-To-Air Satellite Receiver SRT 6016 User Manual Picture similar Safety Instructions SAFETY INSTRUCTIONS Grounding, Polarization -- If this product is used with a specified AC adapter, the adaptermay be equipped with a polarized alternating current line plug (a plug with one blade wider than the other). This safety feature allows the plug to fit into the power outlet only one way. If you cannot insert the plug into the wall outlet, pull it out, reverse it, and then reinsert it. If the plug still fails to fit, contact an electrician and have the receptacle replaced n Protecting the Power Cord -- The power supply cord should be placed so it will not bewalked on. [. . . ] Select OK and press the OK key to confirm. 5. 2. 2 Auto Scan Press the GREEN key to set the scan mode to Free or Free+Scrambled. If mode is Free then only "Free to Air" channels will be added to the channel list. If mode is Free+Scrambled then all channels from selected satellite will be added to the channel list. Press the YELLOW Key to set the Blind Scan to ON or OFF. Blind scan function is useful to scan new added satellite, but scan may take long time. Press the BLUE Key to set the scan type to NIT OFF or NIT ON while Blind Scan is set to OFF and to Quick Search or Detail Search while Blind Scan is set to ON. When the set-up is completed, press the RED key to start the scan, shown as below. 5. 2. 3 Manual Scan In this menu, you can scan single transponder, add a new transponder, edit the transponder or delete the transponder. You can switch between satellites with the RED button, Scan transponder: Use UP/DOWN buttons to select the transponder. Add Transponder: In this menu, you can add a new transponder to the system. Press the GREEN button, the Add Transponder sub-menu will appear. Frequency: input the frequency of the new transponder. Symbol Rate: input the symbol rate of the new transponder. Polarity: Select the Polarity of the new transponder. 11 English PART 1 · English Edit Transponder: In this menu, you can edit a transponder in the system. Press the YELLOW button, the Edit Transponder sub-menu will appear. This menu is similar to Add Transponder menu. Delete Transponder Press the BLUE button to delete a transponder. Press LEFT/RIGHT to select OK, press the OK button to confirm. 5. 3 System setting In this menu, you configure the system, such as Language Setting, OSD style, Parental Control, TV Settings and Time Setting. 5. 3. 1 Preference 5. 3. 1. 1 Language Setting You can change the language of the OSD, preferred Audio and Subtitles. Use UP/DOWN to select the OSD language, Audio language or Subtitles language. Press OK or Right to enter the language list and Press UP/DOWN to select the language. Press OK to confirm. 5. 3. 1. 2 TV settings You can set the TV mode, Screen mode and Video output. n TV mode In TV mode Screen press OK or RIGHT to select mode, press OK to confirm. [. . . ] The Moving Picture Experts Group is founded by the ISO. MPEG is a standard method for digital transmission of video and audio. A network which is also known as a bouquet is a set of channels that is offered by a single broadcaster. Referring to the Phase Alternate Line colour system adopted by European broadcasters. [. . . ]