User manual STRONG SRT 6155

[. . . ] PART 1 · English Thank you for choosing this Strong satellite receiver. This receiver is of our latest development and it is designed to be capable of safely install your receiver and to achieve its optimum performance. 1. 0 Usage This user manual is applicable for Strong SRT 6155 Digital Satellite Receiver and its related accessories. It is advised that first-time and experienced users read this manual in order to safely install the receiver. Strong has supplied this product with the most recent innovations of software and hardware. [. . . ] Time setting: The system uses GMT (Greenwich Mean Time) as a default. To set the time, apply the following steps <Please see inside cover Screen 15>: 1. Select "Time Settings" and press OK or the Right button. Select Time Zone: Press OK or the Right button, and a list of the GMT plus or minus the hours you need for your country is displayed. Using UP/DOWN keys select the correct one, and the receiver will automatically show the current time in your country. To set the time manually: 13 PART 1 · English Select GMT usage: Press OK or the Right button and use the UP/DOWN buttons to set the GMT usage to "off". The time setting menu will now activate the bottom two fields of the menu. Select Set Local Time: Press OK or the Right button. Use your UP/DOWN buttons or Numeric buttons [0-9] to set the local time. When set, press OK to save the local time. Select Set Date: Press OK or the Right button and set the date the way you have set the time. Press the BACK button until you go back to the Main Menu. Power on Channel: This function allows you to set the channel you want when the receiver turns on. To set the power on channel, apply the following steps <Please see inside cover Screen 16>: 1. Select Power on Channel and press OK or the Right button. Last Viewed: The receiver will start-up with the channel that you viewed before turning the receiver off. Define Channel: This function allows you to set the channel you want when the receiver turns on. To define the channel, apply the following steps: 1. Press OK or the Right button and select in the TV or radio list of channels the channel you want to have your receiver start-up with. System Upgrade: You can download the latest software available including new technologies to your receiver. To upgrade your system, apply the following steps: 1. Select "System Upgrade" and press OK 2. [. . . ] After 30 seconds reconnect to the main power and check if it is working properly Press the MUTE button on the remote control unit of your receiver and TV No sound The receiver or TV is in "MUTE" mode No sound or picture Firmly press the scart connectors on the backside of the TV and receiver. Problem in scart cable connections between receiver Replace the scart cable and TV Wrong alignment of the dish Check the signal strength with a spectrum analyser and adjust your dish correctly This is normal, the bad weather is interfering the signal between the satellite and your dish Once the weather is better the picture will appear. If not : check if there is no snow on your dish No picture The receiver displays the message "No or Bad signal" during bad weather conditions (heavy rain or snow) Wrong satellite selected in the Press the SAT button on the RCU and select the correct satellite The receiver displays the message "No or Bad signal" menu Wrong parameters set in the Check settings in LNB- and Channel set up menu The receiver displays the message "No or Bad signal" menu Wrong alignment of the dish Ask your dealer to check the outdoor unit and antenna cable to LNB The receiver displays the message "No or Bad signal" The RED and Green lights on Overload of the maximum the front panel of your receiv- available LNB power. (Short circuit in the LNB cable) er are blinking The remote control is not working The batteries of the remote control are not inserted or exhausted Disconnect the 220 V main power and ask your dealer to check the LNB cable Check whether the batteries are inserted correctly in your remote control. [. . . ]