User manual STRONG SRT 6500

[. . . ] Digital Cryptoworks Embedded Satellite Receiver SRT 6500 User Manual PART 1 l English TABLE OF CONTENTS 1. 0 INTRODUCTION 1. 1 Overview 1. 2 Main Features 2. 0 SAFETY / PRECAUTIONS 2. 1 Safety 2. 2 Precautions 3. 0 4. 0 ACCESSORIES CONTROLS / FUNCTIONS 4. 1 Front Panel 4. 2 Rear Panel 4. 3 Remote Control Handset 5. 0 USING THE REMOTE CONTROL 5. 1 Batteries 5. 2 Range Of Operation 6. 0 CONNECTING THE RECEIVER 6. 1 To a TV set, using TV SCART connection 6. 2 To a Hi-Fi system and a TV set, using both A/V connections 6. 3 To a VCR and a TV set, using both SCART connections 7. 0 8. 0 STARTING UP FOR THE FIRST TIME SETUP AND OPERATION 8. 1 Before Setup 8. 2 Setup Menu 8. 3 Main Menu Settings 8. 4 General Viewing Information A. 1 A. 2 PROBLEM SOLVING SPECIFICATIONS 2 2 2 3 3 3 4 4 4 5 6 7 7 7 8 8 8 9 10 11 11 11 18 23 28 29 English 1 PART 1 l English 1. 0 INTRODUCTION 1. 1 Overview This satellite receiver was designed for Digital satellite receiver with Cryptroworks embedded. It enables you to tune in on the hundreds of digital television and radio channels broadcasting to your region, with the highest video, audio and data quality attainable with current technology. It performs numerous functions to provide you with a variety of services. 1. 2 Main Features n n n n n n n n n n n n n n n n n n n n n n n n n For all digital Free-To-Air TV and Radio programmes via satellite Embedded Smartcard reader for Cryptoworks smartcard Display showing channel number or time Separate power switch Digital sound through coaxial output (S/PDIF) Parental lock function for menu and selectable per channel Over 3 000 TV channel memory capacity and 1 000 radio channel memory capacity Pre-programmed with most popular channels 5 Favourite lists for TV-and Radio programme Quick and easy installation & user-friendly menu Excellent Audio & Video quality Teletext via VBI & OSD Supports DiSEqC 1. 0 and DiSEqC 1. 2 Electronic Programme Guide (EPG) for present/following event information and up to 7 days for on screen programme information Timer function (sleep, awake) Multi-lingual audio track support Multi-lingual support on screen menu (OSD): English, Hungarian, Czech, Slovak, Bulgarian, Turkish, German Edit function for TV and Radio programme name, Favourite Group name, and Transponder information Future-proof: Software update via satellite (OTA) Signal strength bar for digital transponders Automatic and manual channel scan options Power on with last viewed channel User-friendly remote control (Infrared up to 7 meters) Low power consumption PAL / SECAM / NTSC compatible 2 PART 1 l English 2. 0 SAFETY / PRECAUTIONS English 3 2. 1 Safety n Be sure to read this manual before you start operating the unit Do not touch the power cord with wet hands, as that may cause electric shock Never open the cover. It is very dangerous to touch the inside of the unit, due to possible electric shock The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as base, shall be placed on the apparatus n n n n Place the unit in an adequately ventilated and cool environment When not in use for a long time, it is recommended that the power cord be disconnected from the mains. [. . . ] Message "Saving data. . . " will be shown on screen. Selected transponder deleted from the list n n 8. 2. 3. 4 How to correct/edit parameters of the transponder Set "Tune method" to "TP" or "TP+NIT" Move focus to "Transponder" and choose transponder you want to modify n Move focus to "Frequency" and enter value in MHz n Move focus to "Symbol rate" and enter value in kSPS n Move focus to "Polarity" and select value n Move focus to "FEC" and select value or set "Auto" n Move focus to "Function" select "Change" and press OK. Message "Saving data. . . " will be shown on screen. Modified data are stored in the memory n n n Press EXIT to go back to the previous mode 8. 2. 4 Setup Lock/PIN Press OK on `Setup Lock/PIN' in the Setup Menu. Set the Menu Lock, Change the PIN, enter the New PIN and confirm the Confirm PIN. n n Use CH p/q to move up and down the list Use Vol t/u to change the setting Menu Lock: Change PIN: New PIN: Confirm PIN: On/Off Press OK if you want to change. Enter your new 4-digit code Confirm your new 4-digit code Note: The default PIN is `1234' n Press EXIT to go back to the previous mode 16 PART 1 l English 8. 2. 5 Time Setting the Timer. n n Use CH p/q to move up and down the list Use Vol t/u to change the setting Local Time: Sleep Time: Timer: Status: If you want to correct time and date then enter in format dd/mm/yyyy - day ­ hh:mm 0 ~ 180 min. Receiver will be turned off after selected time interval Select timer number Disabled/Enabled. If Enabled ­ receiver will be turned on within selected channels at defined "start time" and turned off after "duration" interval Channel type: Channel number: TV/Radio Enter channel number. If you use multi satellite installation ­ make sure to enter channel number in "All satellites" mode Channel name: Start time: Duration: Displayed automatically and depends from channel number Enter start time in format dd/mm/yyyy - day ­ hh:mm Enter duration in hh:mm format NOTE: Timer also can be programmed from EPG. See "Program Guide" chapter of this manual. n Press OK to store settings and go back to the previous mode 8. 2. 6 Factory Default Press OK on `Factory Set' in the Setup Menu. Confirm whether you wish to go back to the factory default settings. This function will return all settings of the receiver to factory default. All your channels, favourite lists and settings will be cleared from the memory. 17 English Press OK on `Time Setting' in the Setup Menu. Set the Local Time, Sleep Time, Timer Status and Program PART 1 l English 8. 3 Main Menu Settings From the Main Menu you can access to the Program Guide, Channel Sorting, Language Preference Settings, Favorites Editing, Channel Editing, Smart card information and Software Version information. n n n n n Press MENU Use CH p/q to move up and down the list Use Vol t/u to change the setting Upon reaching the required menu line, press OK to enter the setting Press EXIT to go back to the previous mode 18 PART 1 l English 8. 3. 1 Program Guide English 19 This menu displays same information as described in chapter 8. 4. 4. Press OK on `Program Guide' in the Main Menu. 8. 3. 2 Sort Channels Press OK on `Sort Channels' in the Main Menu. The following window will appear. n n n n n Use Vol t/u to select an alphabetical letter Press OK to confirm your choice Use CH p/q to move up and down in the list Use Vol t/u to scroll pages Down or Up Pressing OK on the highlighted channel calls that channel and closes this menu Press EXIT twice to go back to the previous mode n 8. 3. 3 Language Press OK on the `Language Preference'. Select the menu language and Logo for Radio channel Menu Language: Available English / Hungarian / Czech / Slovak / Bulgarian / Turkish / German Radio Ch Logo: Enable or disable logo for Radio channels n n n n Use CH p/q to move upwards and downwards in the menus Use Vol t/u to change the values in the alternatives When you have reached the required subject menu, press OK to confirm your selection Press EXIT to go back to the previous mode PART 1 l English 8. 3. 4 Edit Channels Press OK on the `Edit Channel'. TV/Radio Channel Move Channel Favorite Lock Channel Delete Channel Add Channel Edit Name Use EXIT button to toggle between channel lists and function selection. To toggle between TV and Radio lists highlight function and use CH p/q to select list. To return to menu press EXIT button when any function is highlighted. You will be required to confirm or discard changes that you have made. 8. 3. 4. 1 Move channel To move channel highlight icon and press OK. Highlight the channel which you want to move and press OK. If you want to move group of channels ­ highlight and select with OK button all channels that you want to move. [. . . ] Highlight "List" to sort channels by alphabet, number of FTA. n n n n Mode "ALL (1, 2, 3. . )" is to display all channels from current satellite in channel number order Mode "ALL (A. B. C. . )" is to display all channels from current satellite in Alphabet order Mode "Free (1, 2, 3. . )" is to display only FTA channels from current satellite in channel number order Mode "Free (A. B. C. . )" is to display only FTA channels from current satellite in Alphabet order Press OK to return to the channel list. To exit from the channel list press OK when channel is highlighted or press EXIT button twice. TV Channel List ­ satellite selection EXIT Vol t/u to select satellite OK 24 PART 1 l English TV Channel List ­ channels sorting EXIT Vol t/u to select sort mode OK Radio list is similar to TV list. To select between TV and Radio list use TV/RADIO button while channel list is displayed on screen. 25 English PART 1 l English 8. 4. 3 Favorite Channels Lists While watching TV or listening to Radio you can call the respective favorite channels list by pressing FAV. [. . . ]