User manual STRONG SRT 6502

[. . . ] Digital Satellite Receiver with Embedded CryptoWorks SRT 6502 User Manual Picture similar PART 1 · English TABLE OF CONTENTS 1. 0 INTRODUCTION 1. 1 Overview 1. 2 Main Features 2. 0 SAFETY/PRECAUTIONS 2. 1 Safety Instructions 2. 2 Storage 2. 3 Equipment Set-up 3. 0 ACCESSORIES 4. 0 CONTROLS/FUNCTIONS 4. 1 Front Panel 4. 2 Rear Panel 4. 3 Remote Control 5. 0 USING THE REMOTE CONTROL 5. 1 Batteries 5. 2 Range Of Operation 6. 0 CONNECTING THE RECEIVER 6. 1 To a TV set, using TV SCART connection. 6. 2 To a Hi-Fi system and a TV set, using both A/V connections 6. 3 To a Video or DVD recorder and a TV set, using both SCART connections 7. 0 STARTING UP FOR THE FIRST TIME 8. 0 SETUP AND OPERATION 8. 1 Before Setup 8. 2 Setup Menu 8. 3 Main Menu Settings 8. 4 General Viewing Information A. 1 PROBLEM SOLVING A. 2 SPECIFICATIONS 2 2 2 2 2 3 3 3 4 4 4 5 6 6 6 7 7 7 8 8 9 9 9 12 15 19 19 English 1 PART 1 · English 1. 0 INTRODUCTION 1. 1 Overview This satellite receiver was designed for Digital satellite receiver with CryptoWorks embedded. It enables you to tune in on the hundreds of digital te technology. It performs numerous functions to provide you with a variety of services. 1. 2 Main Features n n n n n n n n n n n n n n n n n n n n n n n n n Embedded Smartcard Reader to watch programmes encrypted by CryptoWorks Conditional Access* For all digital Free-To-Air TV and Radio channels via satellite Pre-programmed with most popular channels Excellent Audio & Video quality Quick and easy installation & user-friendly menu Over 3 000 TV channel memory capacity and 1 000 radio channel memory capacity Digital sound through coaxial output (S/PDIF) by connecting to digital amplifier Parental lock function for menu and selectable per channel 5 Favourite lists for TV-and Radio channels Teletext via receiver and TV remote control Display showing channel number or time Power switch Electronic TV Programme Guide (EPG) for on screen programme information of present/following event information up to 4 days Subtitle and Timer function (sleep, awake) Multi-lingual audio track support Multi-lingual support on screen menu (OSD), such as English, German, Czech, Slovak, Hungarian, Bulgarian, Turkish Edit function for TV and radio programme name, favourite group name, and transponder information Future-proof: Software update via satellite (OTA) Signal strength bar for digital transponders Automatic and manual channel scan options Power on with last viewed channel User-friendly remote control with coloured function buttons (Infrared up to 7 metres) Supports DiSEqC 1. 0 and DiSEqC 1. 2 PAL/ NTSC/ SECAM compatible Connectors: SAT IN, SAT OUT, 1 TV SCART (RGB, CVBS, Y/C, Audio), 1 VCR SCART (CVBS, Y/C, Audio), 2 RCA (Audio L&R), coaxial Digital Audio: S/PDIF, Separate power switch * Precondition is an activated and valid CryptoWorks smartcard 2. 0 SAFETY/PRECAUTIONS 2. 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: n In a closed or poorly ventilated cabinet; directly on top of or under any another equipment; on a surface which might obstruct the ventilation slots DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES: n To direct sunlight or near any other equipment that generates heat; to rain or intense moisture; to intense vibration or to any shock which may cause permanent damage to your receiver or to any magnetic objects, such as loudspeakers, transformers, etc. [. . . ] 8. 2. 5 Time Setting Press OK on `Time Setting' in the Setup Menu. Set the Local Time, Sleep Time, Timer Status and Program the Timer. n n Use CH p/q to move up and down the list. if you want to correct time and date then enter in format dd/mm/yyyy - day ­ hh:mm 0 ~ 180 min. Receiver will be turned off after selected time interval. If Enabled ­ receiver will be turned on within selected channels at defined "start time" and turned off after "duration" interval TV/Radio. If you use multi satellite installation ­ make sure to enter channel number in "All satellites" mode. displayed automatically and depends from channel number. enter start time in format dd/mm/yyyy - day ­ hh:mm enter duration in hh:mm format. See "Program Guide" chapter of this manual. Press OK to store settings and go back to the previous mode. Local Time: Sleep Time: Timer: Status: Channel type: Channel number: Channel name: Start time: Duration: Note: n 8. 2. 6 Factory Default Press OK on `Factory Set' in the Setup Menu. Confirm whether you wish to go back to the factory default settings. This function wi the memory. 8. 3 Main Menu Settings From the Main Menu you can access to the Program Guide, Channel Sorting, , Language Preference Settings, Favorites Editing, Channel Editing, Smart card information and Software Version information. n n n n n Press MENU Use CH p/q to move up and down the list Use VOL t/u to change the setting Upon reaching the required menu line, press OK to enter the setting Press EXIT to go back to the previous mode 8. 3. 1 Program Guide This menu displays same information as described in chapter 8. 4. 4. Press OK on `Program Guide' in the Main Menu. 12 PART 1 · English 8. 3. 2 Sort Channels Press OK on `Program Search' in the Main Menu. n n n n n n Use VOL t/u to select an alphabetical letter. Pressing OK on the highlighted channel calls that channel and closes this menu. Press EXIT twice to go back to the previous mode. English 13 Use CH p/q to move up and down in the list. 8. 3. 3 Language Press OK on the `Language Preference'. Select the menu language and Logo for Radio channel Menu Language: Radio Ch Logo: n n n n Available English / Hungarian / Czech / Slovak / Bulgarian / Turkish / German enable or disable logo for Radio channels Use CH p/q to move upwards and downwards in the menus. Use VOL t/u to change the values in the alternatives. When you have reached the required subject menu, press OK to confirm your selection. Press EXIT to go back to the previous mode. 8. 3. 4 Edit Channels Press OK on the `Edit Channel'. TV/Radio Channel Move Channel Add to Favorite Lock Channel Delete Channel Add Channel Edit Name Use EXIT button to toggle between channel lists and function selection. To toggle between TV and Radio lists highlight have made. [. . . ] Incorrect values of some tuner parameters. Wrong direction of the dish The remote control does not work The batteries of the remote controller are not inserted or exhausted Set the values of the tuner parameters correctly in the installation menu. Check the signal strength with a spectrum analyzer and adjust your dish correctly. Check whether the batteries are inserted correctly in your remote control. [. . . ]