User manual STRONG SRT 6855

[. . . ] Digital Satellite Receiver with Embedded Mediaguard SRT 6855 User Manual Picture similar 1 SAT OUT 2 SAT IN 13/18V 7 300mA CONSTANT 600mA INTERMITTENT 10 TO TV 9 INPUT ANTENNA IR SENSOR 90-240V AC ~ 50Hz/60Hz 25W MAX. R AUDIO L VIDEO SPDIF SVHS SERIAL PORT Supplied by Strong & Co. Japan 3 4 5 11 6 13 8 12 SAT OUT SAT IN SAT OUT SAT IN SAT OUT SAT IN SAT OUT SAT IN SAT OUT SAT IN SAT OUT SAT IN SAT OUT SAT IN SAT OUT SAT IN SAT OUT SAT IN SAT OUT SAT IN PART 1 · English TABLE OF CONTENTS 1. 0 USAGE 1. 1 Safety Instructions: 1. 2 Features & Accessories 1. 3 Safety Precautions 1. 4 Storage 1. 5 Equipment Set-up 2. 0 YOUR RECEIVER 2. 1 Front Panel 2. 2 Rear Panel 3. 0 CONNECTIONS 3. 1 Connecting to your TV & VCR 3. 1. 1 Basic connection with a coaxial cable 3. 1. 2 Basic connection with a Scart cable 3. 1. 3 Advanced connection 3. 1. 4 Connection with Audio Cable RCA Connectors 3. 1. 5 Connection to a digital audio amplifier using the S/PDIF output 3. 1. 6 Connecting a remote eye 3. 1. 7 Connecting a serial cable 3. 2 Connecting to a satellite dish 3. 2. 1 Connecting a fixed satellite dish to your receiver 3. 2. 2 Connecting multiple fixed dishes to your receiver using a DiSEqC1. 0 switch 3. 2. 3 Connecting a dish on a motorized positioner to your receiver 4. 0 QUICK START 5. 0 NAVIGATING IN THE MENU 5. 1 Main Menu 5. 1. 1 Channel Organizer Menu 5. 1. 2 Favourite Organizer Menu 5. 1. 3 The Timer Menu 5. 1. 4 The Installation Menu 5. 1. 5 Smartcard 6. 0 REMOTE CONTROL - BASIC FUNCTIONS A. 1 TROUBLE SHOOTING A. 2 GLOSSARY OF TERMS 2 2 3 4 4 4 5 5 5 6 6 6 6 7 7 7 7 7 8 8 8 8 9 11 11 11 14 14 15 23 24 26 28 1 English PART 1 · English 1. 0 USAGE This user manual is applicable for Strong SRT 6855 Digital Satellite Receiver with Embedded Mediaguard and its related accessories. It is advised that first-time and experienced users read this manual in order to safely install the receiver. Strong has supplied this product with the most recent innovations of software and hardware. [. . . ] n Audio Output: Press OK or the RIGHT button and set your audio output to "Stereo", "Left" or "Right" (left or Right is for mono TV sets) n S/PDIF Output: Press OK or the RIGHT button and activate your S/PDIF output on the BACK of your receiver, so you can connect it to a digital Audio amplifier using an coaxial cable. If you have connected your digital amplifier, set the SPDIF output to: "Enabled". n VCR Output: Press OK or the RIGHT button and set the scart output to "Automatic" or "Terminal". If set to "Terminal", the VCR scart signal is not automatically looped through. n RF modulator: Press OK or the RIGHT button and set the UHF mode to "PAL B/G", "PAL I" or "PAL D/K". If the TV set is connected using a coaxial (RF) cable, you must select RF modulator type here. The RF modulator type affects the channel audio. (Select PAL I for UK , Pal B/G for use in Central Europe). n RF Channel: Press OK or the RIGHT button and set the UHF channel number to the same UHF channel number of your TV set. This only has to be done if your TV set is connected with a coaxial (RF) Cable. If the UHF Channel numbers of the receiver and the TV set are not set the same, no picture will be displayed. Press BACK until you go BACK to main menu. Menu Settings: You can set the OSD (On Screen Display) to your personal preferences. You can change the OSD by applying the following settings: 1. Select "Menu Settings" and press OK or the RIGHT button. n Color Scheme: Press OK or the RIGHT button and set the colours of the OSD menu to "Standard", "Color 1" or "Color 2". n Transparency: Press OK or the RIGHT button and select how transparent you want your OSD. n Brightness: Press OK or the RIGHT button and select how you want the OSD to be. n n 16 PART 1 · English Duration: Press OK or the RIGHT button and select how long you want the information banner to be on the screen when starting up your receiver or when changing channels. Press BACK until you go BACK to main menu. n n Time setting: The system uses GMT (Greenwich Mean Time) as a default. To set the time, apply the following steps: 1. Select "Time Settings" and press OK or the RIGHT button. n Select Time Zone: Press OK or the RIGHT button, and a list of the GMT plus or minus the hours you need for your country is displayed. [. . . ] A network, which is also known as a bouquet, is a set of channels that is offered by a single broadcaster. A menu system that you navigate from your remote control. Referring to the Phase Alternate Line colour system adopted by European broadcasters. This function gives you the possibility to "lock" other several functions of the receiver to prevent unauthorized users such as children to view channels that are not suitable for them. [. . . ]