User manual STRONG SRT L 1550

[. . . ] Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . 34 Control Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Installation of device on the wall . . . . . . . . [. . . ] If you want to change one of the frequency values of the predefined options, the Mode must be switched to User option. The 5 items below the Mode are available to adjust the sound settings in 5 frequency values: 120 Hz, 500 Hz, 1. 5 kHz, 5 kHz and 10 kHz. To change the values of 5 frequency options, select one of the options by or button, and then press 92/ to increase the value, or WPG to decrease the value. In mid position, cursor is displayed with one arrow. To store the Equalizer settings, press WPG or 92/ button or directly press OK button on Store option. 2Q To Store the Settings When the cursor is on any item which has no sub-menu press OK button on the remote control to store the settings directly. or, Press WPG, 92/ or OK button on Store option to store Sound menu settings. 6RXQG 6WRUHG - 45 2-50060076-1506-ENGLISH TFT-1090 UK-WM-AU PANEL. p65 45 25. 01. 2005, 17:22 Picture Menu To enter the Picture menu directly, press the Green button, or Press "MENU" button, now you are in main menu. In the Main menu, select Picture using or button, then enter the PicWPG 3LFWXUH ture menu pressing button. or 92/ Setting Colour Using or button select Colour. 0HQX Press 92/ button to increase colour level. Press level. WPG button to decrease colour 3LFWXUH Setting Brightness As you enter the picture menu, Brightness will be the first item. button to increase brightbutton to decrease brightSetting Sharpness Using or button select Sharpness. WPG 3LFWXUH Press 92/ button to increase peaking level. Press level. WPG button to decrease peaking 3LFWXUH Setting Contrast Using or button select Contrast. Press 92/ button to increase contrast level. Press level. WPG button to decrease contrast Setting Hue (During Playback NTSC system, this will appear in AV mode only when NTSC video source is applied. Otherwise, HUE option is invisible in Picture menu. ): Using or button select Hue. Press 92/ button to increase hue level. - 46 2-50060076-1506-ENGLISH TFT-1090 UK-WM-AU PANEL. p65 46 25. 01. 2005, 17:22 Press WPG button to decrease hue level. Center value is indicated with one arrow. Sleep Timer As you enter the Feature menu, Sleep Timer will be the first selected option. Use WPG or 92/ button to change the Sleep Timer values between Off, 0:15, 0:30, 0:45, 1:00, 1:15, 1:30, 1:45 and 2:00. If sleep timer is activated it is displayed with the TV status on the upper right of the screen after pressing the button on the remote control. 3LFWXUH To Store the Settings When the cursor is on any item which has no sub-menu press OK button on the remote control to store the settings directly. or, Press WPG, 92/ or OK button on Store option to store Picture menu settings. )HDWXUH 2II After the setting time of sleep timer ended, TV goes automatically to stand-by. Child Lock You can use this feature to prevent children turning on/off TV or changing programmes or adjustments etc. The Child Lock feature can be set On or Off by WPG or 92/ button. When Off is selected, there will be no difference in the operation of your TV. When On is selected, the TV can only be controlled by the remote control handset. In this case, the front panel and stand-by buttons will not work. 3LFWXUH 6WRUHG Feature Menu To enter the Feature menu directly, press the Yellow button, or Press "MENU" button, now you are in main menu. [. . . ] Check if you have entered the correct frequency. The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals. For Monitor : Check that Video (Signal) Cable from the Display has been securely and correctly connected to the 15-pin Video Connector on the rear panel of the Computer. [. . . ]