User manual STRONG SRT L 2050

[. . . ] (QJOLVK Contents Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 2 Control Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation of device on the wall (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press WPG or 92/ button to set Picture Mode. Picture Mode can be set to Auto, 4:3 or 16:9. or button select Picture Press 92/ button to increase contrast level. Press level. WPG button to decrease contrast 3LFWXUH 3LFWXUH Setting Colour Using - 14 01-ENG-2007-1090 UK-20 INCH TFT-DUVAR MONT-YENI SW-AU-SS. p65 14 button select Colour. or 29. 01. 2005, 08:43 (QJOLVK Setting Noise Reduction Using or duction. button select Noise ReTo Store the Settings When the cursor is on any item which has no sub-menu press OK button on the remote control to store the settings directly. or, Press WPG , 92/ or OK button on Store option to store Picture menu settings. Press WPG or 92/ button to select Noise Reduction level Off or Minimum or Medium or Maximum then select store and press WPG or 92/ button to save your setting. Note 1: At low signal level, the changings on the Noise Reduction function are not effective when there is menu on the screen. If the menu is removed, the effect of this function is seen. At normal broadcasting, Noise Reduction changings are effective at once. 3LFWXUH Note 2: At moving pictures, while Noise Reduction is at maximum level, some picture distortions may occur. If Noise Reduction is set to medium or minimum, the picture will improve. 6WRUHG Feature Menu To enter the Feature menu directly, press the Yellow button, or Press "MENU" button, now you are in main menu. In the main menu, select Feature using or button. Then enter the FeaWPG 3LFWXUH 0HGLXP Setting Hue (During Playback NTSC system, this will appear in AV mode only when NTSC video source is applied. Otherwise, HUE option is invisible in Picture menu. ): Using or button select Hue. ture menu pressing OK button. / 92/ or 0HQX Sleep Timer As you enter the Feature menu, Sleep Timer will be the first selected option. Use WPG or 92/ button to change the Sleep Timer values between Off, 0:15, 0:30, 0:45, 1:00, 1:15, 1:30, 1:45 and 2:00. If sleep timer is activated it is displayed with the TV status on the upper right of the screen. Press 92/ button to increase hue level. Press WPG button to decrease hue level. Center value is indicated with one arrow. 3LFWXUH - 15 01-ENG-2007-1090 UK-20 INCH TFT-DUVAR MONT-YENI SW-AU-SS. p65 15 29. 01. 2005, 08:43 (QJOLVK )HDWXUH )HDWXUH 2II After the setting time of sleep timer ended, TV goes automatically to stand-by. Child Lock You can use this feature to prevent children turning on/off TV or changing programmes or adjustments etc. The Child Lock feature can be set On or Off by WPG or 92/ button. When Off is selected, there will be no difference in the operation of your TV. When On is selected, the TV can only be controlled by the remote control handset. In this case the control panel buttons except " the TV will not work. " button at the top of To Store Settings PC Sound Mode 79 PC sound can be chosen by pressing WPG / 92/ button on PC Sound Mode item. [. . . ] Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or Teletext unrecognisable?Check if you have entered the correct frequency. [. . . ]