User manual STRONG SRT VS 150

[. . . ] VIDEO SENDER DOMESTIC VIDEO/AUDIO MICROWAVE LINK The VIDEO LINK transmit / receive system provides a wireless connection between the main source of Audio and Video equipment to another Audio and Video equipment. High quality video and stereo audio can now be distributed without the need for complicated wiring. [. . . ] Plug the Infra Red emitter into the I/R outputs on the transmitter. Run this lead so that the emitter can transmit to the sensor in the source equipment or be able to reach all equipment's to be controlled. Adjust the position of the emitter if it does not operate correctly. Study the equipment that you are trying to control to locate the equipment's sensor. Ensure that the emitter is pointing at the sensor. When the operation has been proved the emitter can be secured with the self-adhesive pad. Remove the protective paper and fix into position. Arrange the Plate aerial and the rod aerial upright and the flat surface pointing towards the receiver. INSTALLATION CONNECTING THE RECEIVER · Connect an RCA-SCART lead from the receiver to the second TV. As shown below: Picture 2: · · Arrange the Plate aerial and the rod aerial upright and the flat surface pointing towards the receiver. The installation is now complete. TESTING THE SYSTEM · · · · · · · With the power connected press the standby button on each unit to switch them on. [. . . ] 0. 2V to 2V in On/off with indicator Size W 80 x D 100 x H 39 MM Infrared link in the IR version. 433MHz CE certified SCART connector accessory for simple connection. RECEIVER Compatible 2. 45 GHz receiver for the above transmitter Directional aerial FM stereo sound Multi-channel : CH1: 2. 410GHz/ CH2: 2. 431GHz/ CH3: 2. 452GHz, CH4: 2. 473GHz On/off with indicator Size W 121 x D 125 x H 39 MM Infra red link in the IR version CE certified [. . . ]