User manual STRONG SRT 5002 ECO

[. . . ] Digital Terrestrial Receiver SRT 5002 ECO User manual Bedienungsanleitung Manuel d'Utilisateur Manuale Utente Manual del usuario Bruger Manual Návod k obsluze 1 1 2 3 4 5 PART 4 · English TAblE of ConTEnTs 1. 0 InsTRuCTIon 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Features & Accessories 2. 0 ConnECTIon 2. 1 Connecting to TV and Terrestrial Antenna 2. 2 Connecting to a Digital Audio Amplifier 3. 0 YouR RECEIvER 3. 1 Front Panel 3. 2 Rear Panel 3. 3 Remote Control 3. 4 Default PIN- code: 0000 4. 0 fIRsT TImE InsTAllATIon 5. 0 mAIn mEnu 5. 1 Channel 5. 2 Installation 5. 3 Setup 5. 4 Tools 5. 5 Media+ 6. 0 oPERATIon 6. 1 Changing Channels 6. 2 Accessing the Electronic Program Guide (EPG) 6. 3 Accessing the favourite channels 7. 0 TRoublE shooTIng 8. 0 sPECIfICATIons 2 2 3 3 4 5 5 5 5 5 5 5 6 6 6 6 8 9 10 11 12 12 12 12 13 13 sTRong declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC; Rohs 2002/95EEC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. from French wired line per March 2010 * 0, 14/Min. [. . . ] Use the qp buttons to select Group Rename and press oK to enter. Use the qptu buttons to navigate the on screen keyboard. Highlighted characters can be inserted by pressing oK. After entering the desired group name, highlight OK at the keyboard to confirm. Press EXIT to cancel the group rename. 5. 2 Installation 5. 2. 1 Auto scan 1. Use the qp buttons to select Installation and press oK to enter menu. Use qp to select Auto Scan and press oK to enter the menu. Use qp to highlight Search and press oK to start auto scan. 5. 2. 2 Channel scan 1. 4. Use the qp buttons to select Installation and press oK to enter the menu. Select Channel Scan with qp and press oK to enter. Use the tu buttons to select the desired Scan Modes ­ By Channel or By Frequency. When By Channel is selected use the cursor buttons to select Scan Band and Channel No. . When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Set Network Search to ON or OFF, highlight Search and press oK to start scanning. Found channels will be stored and the receiver will switch to the first channel in the list. 5. 2. 3 Antenna setting 1. Use the qp buttons to select Installation and press oK to enter the menu. Select Antenna setting with qp and press oK to enter. Use the tu buttons to change the setting. If On is selected, the receiver will provide 5V antenna power (for active antennas). Press EXIT button to exit. 5. 2. 4 lCn mode If LCN (Logical Channel Numbering) is activated and LCN signal is provided by the operator, channels will be stored in operator defined order. You can activate/deactivate the LCN function by setting the LCN Mode to ON or OFF. 8 PART 4 · English 5. 3 setup This menu allows you to set OSD Language, Subtitles preference, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock. [. . . ] stepping through the channel list To move through the channel list, use the pq buttons on the remote control. selection by direct channel number input Enter the channel number directly by using numeric buttons, and press the oK button to select the channel. selection by on-screen channels list You can also select the required channel directly from on-screen channel list. To call up the channel list, oK in viewing mode. [. . . ]