User manual STRONG SRT 5301

[. . . ] Digital Terrestrial Receiver sRT 5301 user manual Picture similar PART 1 • English Table of Contents 1. 0 Instruction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 Connection 2. 1 Connecting to TV and Terrestrial Antenna 2. 2 Connecting to a Digital Audio Amplifier 3. 0 Your Receiver 3. 1 Front Panel 3. 2 Rear Panel 3. 3 Remote Control 3. 4 Default PIN- code: 0000 4. 0 First Time Installation 5. 0 Main Menu 5. 1 Channel 5. 2 Installation 5. 3 Setup 5. 4 Tools 5. 5 Media+ 6. 0 OPERATION 6. 1 Changing Channels 6. 2 Accessing the Electronic Programme Guide (EPG) 6. 3 Accessing the favourite channels 7. 0 Trouble Shooting 8. 0 Specifications 2 2 3 3 4 4 4 4 4 4 4 5 5 5 6 6 6 8 8 10 11 12 12 12 12 13 13 English 12 Mar 2012 12:39 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. All rights reserved. 1 PART 1 • English 1. 0 Instruction 1. 1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Select Delete All with qp and press OK, then enter the password (default: 0000). In the confirmation window select Yes with tu and press OK to delete or select No to cancel. 5. 1. 5 Rename group In this menu you can change the name of favourite groups. Use the qp buttons to select Group Rename and press OK to enter. 1. Select a group with qp and press OK. 2. Use the qptu buttons to navigate the on screen keyboard. Highlighted characters can be inserted by pressing OK. After entering the desired group name, highlight OK at the keyboard to confirm. 3. Press EXIT to cancel the group rename. 7 English PART 1 • English 5. 2 Installation 5. 2. 1 Auto Scan 1. Use the qp buttons to select Installation and press OK to enter menu. 2. Use qp to select Auto Scan and press OK to enter the menu. Use qp to highlight Search and press OK to start auto scan. 5. 2. 2 Channel Scan 1. 2. 3. 4. Use the qp buttons to select Installation and press OK to enter the menu. Select Channel Scan with qp and press OK to enter. Use the tu buttons to select the desired scan modes – By Channel or By Frequency. When By Channel is selected use the cursor buttons to select Scan Band and Channel No. When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Set Network Search to ON or OFF, highlight Search and press OK to start scanning. Found channels will be stored and the receiver will switch to the first channel in the list. 5. 2. 3 Antenna Setting 1. 2. 3. 4. Press MENU to enter main menu. Use the qp buttons to select Installation and press OK to enter the menu. Select Antenna Setting with qp and press OK to enter. Use the tu buttons to change the setting. If On is selected, the receiver will provide 5 V antenna power (for active antennas). 5. Press EXIT button to exit. 5. 2. 4 LCN Mode If LCN (Logical Channel Numbering) is activated and LCN signal is provided by the operator, channels will be stored in operator defined order. You can activate/deactivate the LCN function by setting the LCN Mode to ON or OFF. 5. 3 Setup This menu allows you to set OSD Language, Subtitles preference, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock. [. . . ] 3. Press EXIT to quit. In the Media+ menu, select Safely Remove Storage Device and press OK to safely remove the USB device. A message indicating that the device can be removed, will be displayed. 5. 5. 2 Safely Remove Storage Device 11 English PART 1 • English 6. 0 OPERATION 6. 1 Changing Channels There are 4 ways of channel selection: stepping through the channel list, selection by number, from the on-screen channel list, and using the electronic programme guide (EPG). Stepping through the channel list To move through the channel list, use the pq buttons on the remote control. Selection by direct channel number input Enter the channel number directly by using the numeric buttons, and press the OK button to select the channel. [. . . ]