User manual STRONG SRT 5302

[. . . ] Digital Terrestrial Receiver SRT 5302 User manual Bedienungsanleitung Manuel d’utilisation Manuale utente Manual del usuario Návod k obsluze Upute za korištenje Picture similar 0820 400 150 AT support_at@strong. tv € 0, 12/Min. Festnetz HOTLINE FR 0826 029 928 support_fr@strong. tv € 0, 15 par mn poste fixe en France support_it@strong. tv Da rete fissa 24, 8 cent. scatto alla risposta Da rete mobile max 49 cent. scatto alla risposta BG +359 32 634451 support_bg@strong. tv CEE +36 1 445 26 10 support_hu@strong. tv IT 199 404 032 DE 0180 501 49 91 support_de@strong. tv € 0, 14/Min. [. . . ] Select Delete All Favourites with the qp buttons and press OK. Use tu to select Yes in the confirmation window and press OK to delete or select No to cancel. 5. 1. 4 Delete all Use this option to delete all channels. Select Delete All with qp and press OK, then enter the password (default: 0000). In the confirmation window select Yes with tu and press OK to delete or select No to cancel. 5. 1. 5 Rename group In this menu you can change the name of favourite groups. Use the qp buttons to select Group Rename and press OK to enter. 1. Select a group with qp and press OK. 2. Use the qptu buttons to navigate the on screen keyboard. Highlighted characters can be inserted by pressing OK. After entering the new group name, highlight OK at the keyboard to confirm. 3. Press EXIT to cancel the group rename. 7 English PART 1 • English 5. 2 Installation 5. 2. 1 Auto Scan 1. Use the qp buttons to select Installation and press OK to enter the menu. 2. Use qp to select Auto Scan and press OK to enter the menu. Use qp to highlight Search and press OK to start auto scan. 5. 2. 2 Channel Scan 1. 2. 3. 4. Use the qp buttons to select Installation and press OK to enter the menu. Select Channel Scan with qp and press OK to enter. Use the tu buttons to select scan mode – By Channel or By Frequency. When By Channel is selected use the cursor buttons to select Scan Band and Channel No. When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Set Network Search to ON or OFF, highlight Search and press OK to start scanning. Found channels will be stored and the receiver will switch to the first channel in the list. 5. 2. 3 Antenna Setting 1. 2. 3. 4. Press MENU to enter the main menu. Use the qp buttons to select Installation and press OK to enter the menu. Select Antenna Setting with qp and press OK to enter. Use the tu buttons to change the setting. If On is selected, the receiver will provide 5 V antenna power (for active antennas). [. . . ] 3. Press EXIT to quit. In the Media+ menu, select Safely Remove Storage Device and press OK to safely remove the USB device. A message indicating that the device can be removed will be displayed. 5. 5. 2 Safely Remove Storage Device 11 English PART 1 • English 6. 0 OPERATION 6. 1 Changing Channels There are 4 ways of channel selection: stepping through the channel list, selection by number, from the on-screen channel list and using the Electronic Programme Guide (EPG). Stepping through the channel list To move through the channel list, use the pq buttons on the remote control. Selection by direct channel number input Enter the channel number directly by using the numeric buttons, and press the OK button to select the channel. [. . . ]