User manual STRONG SRT 56

[. . . ] Digital Terrestrial Receiver SRT 56 User manual Bedienungsanleitung Manuel d'Utilisateur Manuale Utente Manual del usuario Prirucnik za upotrebu Návod k obsluze Picture similar PART 1 · English TAblE of ConTEnTs 1. 0 InsTRuCTIon 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 ConnECTIon 2. 1 Default Pin-Code: 0000 3. 0 YouR RECEIvER 3. 1 Remote Control 4. 0 fIRsT TImE InsTAllATIon 5. 0 mAIn mEnu 5. 1 Channel 5. 2 Installation 5. 3 Setup 5. 4 Tools 5. 5 Media+ 6. 0 oPERATIon 6. 1 Changing Channels 6. 2 Accessing the Electronic Program Guide (EPG) 6. 3 Accessing the favourite channels A. 1 TRoublEshooTIng A. 2 sPECIfICATIons 2 2 3 3 4 4 5 5 5 5 6 6 6 8 9 11 12 15 15 15 15 16 17 English Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. from French wired line per March 2010 sTRong declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC Rohs 2002/95EEC * 0, 14/Min. [. . . ] After Channels are found, they will be stored and receiver switches to the first one saved in the list. 5. 2. 2 Channel scan 8 PART 1 · English 5. 2. 3 Antenna setting 1. Use the pq buttons to select Installation, press oK to enter the menu. With the pq buttons select Antenna setting and press oK to enter. If On is selected, the receiver will provide 5 V antenna power (for active antennas). Press EXIT button to exit. 5. 2. 4 logical channel numbering If LCN (Logical Channel Number) is activated and LCN signal is provided by operator, then channels will be stored at operator defined order. You can activate/deactivate the LCN function by setting the Local Channel Numbering to On or Off. 5. 3 setup This menu allows you to set OSD Language, TV System, Region and Time, Timer Setting, OSD Setting, Parental Lock, and Auto Standby function. Press pq buttons to highlight desired menu and press oK button to enter the setting menus. Then press pq buttons to select desired item. Settings can be changed by pressing tu buttons. You can get better overview if press oK first. Now you can select desired setting by pq buttons and confirm it with oK. Press EXIT button to exit. 5. 3. 1 osD language 5. 3. 2 Tv system This menu allows you to set OSD Language. This menu allows to setup different settings concerning your TV set. Display Mode: PAL/NTSC/AUTO Aspect Ratio: Use this menu to configure the screen aspect between: 4:3 PS (Pan&Scan), 4:3 LB (Letter Box) and 16:9 (Wide Screen) and AUTO Video Output: Switch the video output mode either to RGB or to CVBS 5. 3. 3 Region and Time Here you can set your region and time zone. Region: This menu is used for changing the region setting. GMT Usage: This menu is used for usage of GMT. The options are: Off / User Define / By Region GMT Offset: This menu is valid only when User Define is selected at GMT Usage. The GMT offset range is "-11:30 ~ +12:00", with half hour steps. Date/Time: "Date" and "Time" menus are valid only when Off is selected at GMT Usage. Press oK then numeric button to change the date and time. 9 English PART 1 · English Time Display: This menu allow to control whether the time is displayed on screen or not. The options are: Off/On. In this menu you can set a programme timer or sleep timer. [. . . ] stepping through the channel list To move through the channel list, press the pq buttons on the remote control. selected by number Enter the channel number directly by pressing numeric buttons, and press the oK button to select desired channel. selected by on-screen channels list You can also select the required channel directly from on-screen channel list. This is displayed using the receiver's main menu. [. . . ]