User manual STRONG SRT 6010

[. . . ] 3 2 Introduction Safety Instructions Features & Accessories Safety Precautions Storage Equipment Set-up Your Receiver Front Panel Remote Control Unit Rear Panel Connections Connecting to TV & VCR Connecting to Digital Audio Amplifier Connecting to Satellite Dish Connecting to serial cable for downloading software Starting up Main Menu Channel Organiser Installation System setting Timer Game Other operation functions System Information Mosaic (Nine picture view) EPG (Electronic Program Guide) Selection Audio Language Teletext function Trouble Shooting Specifications Glossary of Terms 3 3 4 5 5 6 6 6 7 8 10 10 11 11 13 14 18 19 23 29 39 40 42 42 42 43 45 45 47 48 50 UM 6005-15 ENG 1/26/06 4:18 PM Page 3 PART 1 English 1. 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; Directly on top of or under any another equipment; On a surface which might obstruct the ventilation slots. DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES: To direct sunlight or near any other equipment that generates heat; To rain or intense moisture; To any shock which may cause permanent damage to your receiver; To any magnetic objects, such as loudspeakers, transformers, etc. ; To intense vibration; Never open the cover. [. . . ] SCREEN 21 Delete satellite If you want to delete a satellite, press the YELLOW key. then warning message will appear as below. SCREEN 22 Select OK and press the OK key to confirm. 2 Auto Scan SCREEN 23 Press the GREEN key to set the scan mode to Free or Free+CA. Press the YELLOW Key to set the Blind Scan to ON or OFF. Press the BLUE Key to set the scan type to NIT OFF or NIT ON. When the set-up is completed, press the RED key to start the scan, shown as below. 3 Manual Scan In this menu, you can add a new transponder, edit the transponder or delete the transponder. User can switch satellites with the RED button. SCREEN 25 Add Transponder: In this menu, you can add a new transponder to the system. Press the GREEN button, the Add Transponder sub-menu will appear on screen. Down Frequency: Symbol Rate: Polarity: SCREEN 26 Input the frequency of the new transponder. Input the symbol rate of the new transponder. Select the Polarity of the new transponder. 27 UM 6005-15 ENG 1/26/06 4:18 PM Page 28 PART 1 English Edit Transponder: In this menu, you can edit a transponder in the system. Press the YELLOW button, the Edit Transponder sub-menu will appear on screen. Scan Press UP/DOWN to select a transponder, press the OK button to scan all the channels on the transponder. 28 UM 6005-15 ENG 1/26/06 4:18 PM Page 29 PART 1 English 5. 3 System setting In this menu, you can configure the systems such as language Setting, OSD style, Parental Control, TV Settings and Time Setting. 1 Language Setting You can change the language of the OSD and Audio. Press UP/DOWN to select the OSD language or Audio language. Press OK/RIGHT to enter the language list and Press UP/DOWN to select the language. [. . . ] A PIN code is required to use of the parental lock. The transmitted packages have identifiers (PID) that tells the receiver what to do with the received information. Satellite receivers normally use four types of PID, these are V-PID (video PID), A-PID (audio PID), P-PID (Program PID) and data PID (EPG information). Fixed Dish Free-To-Air broadcast Ku band LNB MPEG Network PAL Parental lock PID 50 UM 6005-15 ENG 1/26/06 4:18 PM Page 51 PART 1 English PIN Code Personal Identification NumberA four-digit code that is used for locking/unlocking, e. [. . . ]