User manual STRONG SRT 6160 PDR

[. . . ] SRT 6160 Digital Satellite Receiver with Personal Digital Recorder ANT IN COAXIAL 1 27 29 26 25 23 28 9 15 12 EPG FREEZE 28 JUMP 30 16 PVR SLEEP REPEAT 21 22 8 LOOP 24 9 OK 5 10 BACK i PAGE 8 MENU 11 14 SAT 6 TV/ RAD 4 PAGE 18 SUB 7 3 FAV TEXT 2 19 17 AUDIO AV 13 1 4 2 3 5 8 0 6 9 20 7 PART 1 English Thank you for choosing this Strong satellite receiver. This receiver is of our latest development and it is designed to be capable of safely install your receiver and to achieve its optimum performance. 1. 0 Usage This user manual is applicable for Strong SRT 6160 PDR Digital Satellite Receiver with integrated Hard Disk and its related accessories. We recommend both first-time- and experienced users read this manual in order to safely install the receiver. Strong has supplied this product with the most recent innovations of software and hardware. [. . . ] To use the DiSEqC switch, set up the DiSEqC version you have (V1. 0 or V1. 1). DiSEqC Input: Select position 1~4 if DiSEqC switch is DiSEqC V1. 0. Select position 1~16 if DiSEqC switch is DiSEqC V1. 1. DiSEqC Repeat: Designate the repeat of switching. (0 ~ 3) Switch 22 kHz: You can set the 0/22 kHz switch to ON or OFF. Tip: If you set "LNB type" to "Universal" (UNI1 ~ UNI3), you will not be able to change settings in both the "LNB Power" menu item and the "Switch 22 kHz" menu item. If you want to change any of these two settings you must set "LNB type" to zero. If DiSEqC switch is Off, you will not be able to change settings in both the "DiSEqC Input" and "DiSEqC Repeat" menu items. Alternatively if you set LNB Dish to "Moved", the DiSEqC switch menu item is automatically switched to off if your "LNB dish" is set to "fixed" you will be able to select the required DiSEqC level in the DiSEqC switch menu item. Press the RED (Save) button or press the GREEN (Save &Exit) button to save the setting and to return to the installation menu. Press the YELLOW (Back) button or BACK button if you don't want to save the setting. 5. 1. 4. 4 Channel Set-up (Please see inside cover Screen 20) The channel set-up is for downloading the channels available on the satellites. There are up to 64 satellites available. To download channels, please apply the following steps (In this menu, you can edit the satellites name, and edit the transponder of the satellite. You can also display the LNB menu and the Positioner Set-up menu by selecting LNB and Dish Position respectively. ): 1. Press the MENU button. Using UP/DOWN keys on your remote, select "Installation" and press OK. Using UP/DOWN keys, select "Channel Set-up" and press OK. 23 PART 1 English 4. Use the UP/DOWN keys on your remote to select an item and use the LEFT/RIGHT button to set up any values. Satellite: Select "Satellite" and press OK. The satellite list is displayed and then you can choose a satellite from which you want to download your channels from by pressing OK. (Please see inside cover Screen 20) Tip: If you want to rename the satellite, press the button on the remote control when you are in the list of satellites. LNB: Select "LNB" and press OK or the Right button. In the "LNB field", select one of the available LNB's. [. . . ] Replace the scart cable No picture and sound No sound The receiver or TV is in "MUTE" mode Problem in scart cable connections between receiver and TV No sound or picture No picture Wrong alignment of the dish Check the signal strength with a spectrum analyser and adjust your dish correctly Once the weather is better the picture will appear. If not: check if there is no snow on your dish The receiver displays the This is normal, the bad message "No or Bad signal" weather is interfering the during bad weather conditions signal between the satellite (heavy rain or snow) and your dish 38 PART 1 English The receiver displays the Wrong satellite selected in message "No or Bad signal" the menu Press the SAT button on the RCU and select the correct satellite The receiver displays the Wrong parameters set in the Check settings in LNB- and Channel set up message "No or Bad signal" menu menu The receiver displays the Wrong alignment of the dish Ask your dealer to check the outdoor unit message "No or Bad signal" and antenna coaxial cable or F-connector to LNB The RED and Green lights on the front panel of your receiver are blinking The remote control is not working Overload of the maximum Disconnect the 220 V main power and ask available LNB power. (Short your dealer to check the LNB cable circuit in the LNB cable) The batteries of the remote Check whether the batteries are inserted control are not inserted or correctly in your remote control. Check the exhausted batteries, and if they are exhausted, replace them This channel is programmed Select TV channel, press AUDIO button, on AC 3 audio. [. . . ]