User manual STRONG SRT 6505

[. . . ] Digital Satellite Receiver with Embedded CryptoWorks SRT 6505 User Manual Picture similar Safety Instructions SAFETY INSTRUCTIONS Grounding, Polarization -- If this product is used with a specified AC adapter, the adaptermay be equipped with a polarized alternating current line plug (a plug with one blade wider than the other). This safety feature allows the plug to fit into the power outlet only one way. If you cannot insert the plug into the wall outlet, pull it out, reverse it, and then reinsert it. If the plug still fails to fit, contact an electrician and have the receptacle replaced n Protecting the Power Cord -- The power supply cord should be placed so it will not bewalked on. [. . . ] No channels will be stored in the memory If you press EXIT button: search process will be interrupted and no channels stored in the memory. 8. 2. 3. 2 How to add new transponder: n n n n n n set "Tune method" to "TP" or "TP+NIT" move focus to "Frequency" and enter value in MHz move focus to "Symbol rate" and enter value in kSPS move focus to "Polarity" and select value move focus to "FEC" and select value or set "Auto" move focus to "Function" select "Append" and press OK. Message "Saving data. . . " will be shown on screen. New transponder will be added to the end of the list 8. 2. 3. 3 How to delete present transponder: n n n set "Tune method" to "TP" or "TP+NIT" move focus to "Transponder" and choose transponder you want to delete move focus to "Function" select "Delete" and press OK. Message "Saving data. . . " will be shown on screen. Selected transponder deleted from the list 8. 2. 3. 4 How to correct/edit parameters of the transponder: n n n n n n n set "Tune method" to "TP" or "TP+NIT" move focus to "Transponder" and choose transponder you want to modify move focus to "Frequency" and enter value in MHz move focus to "Symbol rate" and enter value in kSPS move focus to "Polarity" and select value move focus to "FEC" and select value or set "Auto" move focus to "Function" select "Change" and press OK. Message "Saving data. . . " will be shown on screen. Press EXIT to go back to the previous mode. n PART 1 · English 8. 2. 4 Setup Lock/PIN Press OK on `Setup Lock/PIN' in the Setup Menu. Set the Menu Lock, Change the PIN, enter the New PIN and confirm the Confirm PIN. n n Use CH p/q to move up and down the list. Enter your new 4-digit code The default PIN is `1234' Menu Lock: Change PIN: New PIN: Note: Confirm PIN: Confirm your new 4-digit code Press EXIT to go back to the previous mode. 8. 2. 5 Time Setting Press OK on `Time Setting' in the Setup Menu. Set the Local Time, Sleep Time, Timer Status and Program the Timer. n n Use CH p/q to move up and down the list. if you want to correct time and date then enter in format dd/mm/yyyy - day ­ hh:mm 0 ~ 180 min. Receiver will be turned off after selected time interval. If Enabled ­ receiver will be turned on within selected channels at defined "start time" and turned off after "duration" interval TV/Radio. If you use multi satellite installation ­ make sure to enter channel number in "All satellites" mode. displayed automatically and depends from channel number. enter start time in format dd/mm/yyyy - day ­ hh:mm enter duration in hh:mm format. See "Program Guide" chapter of this manual. Press OK to store settings and go back to the previous mode. Local Time: Sleep Time: Timer: Status: Channel type: Channel number: Channel name: Start time: Duration: Note: n 8. 2. 6 Factory Default Press OK on `Factory Set' in the Setup Menu. Confirm whether you wish to go back to the factory default settings. This function wi the memory. 8. 3 Main Menu Settings From the Main Menu you can access to the Program Guide, Channel Sorting, , Language Preference Settings, Favorites Editing, Channel Editing, Smart card information and Software Version information. n n n n n Press MENU Use CH p/q to move up and down the list Use VOL t/u to change the setting Upon reaching the required menu line, press OK to enter the setting Press EXIT to go back to the previous mode 8. 3. 1 Program Guide This menu displays same information as described in chapter 8. 4. 4. [. . . ] TV is set to wrong channel Solution Check if the power cord is plugged in the wall outlet. Check if the TV is switched on and set your TV to the correct EXT/ AV Problem in SCART cable connections between receiver and TV Receiver "hang-up" Firmly press the SCART connectors on the rear side of the TV and receiver. Replace the SCART cable Switch off the receiver; disconnect the main power cord of the receiver from the 230 V main power. After 30 seconds reconnect to the main power and check if it is working properly No sound No sound on one TV channel The receiver or TV is in "MUTE" mode This channel is programmed on AC 3 audio which disabled the normal audio output to TV-set Message "scrambled channel" Message "Please check your smart card" Message "No or Bad signal" during bad weather conditions (heavy rain or snow) The smart card is not validated The smart card is placed up side down or a wrong smartcard is used This is normal, the bad weather is satellite and dish Contact your local provider Insert the smartcard with the copper contacts on the bottom. [. . . ]