User manual STRONG SRT 6511

[. . . ] Digital Satellite Receiver SRT 6511 User Manual Picture similar PART 1 · English TAblE of ConTEnTs 1. 0 InTRoDUCTIon 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Features & Accessories 2. 0 YoUR RECEIVER 2. 1 Front Panel 2. 2 Rear Panel 2. 3 Remote Control Unit (RCU) 3. 0 ConnECTIons 3. 1 Connecting to TV & VCR 3. 2 Connecting to Digital Audio Amplifier 3. 3 Connecting to Satellite Dish 3. 4 Connecting to computer by serial cable 4. 0 sTARTIng UP foR ThE fIRsT TImE 4. 1 Language Selection 4. 2 Audio Language Selection 4. 3 Time Zone adjustment 4. 4 Satellite configuration 5. 0 mAIn mEnU 5. 1 Installation 5. 2 Program Setting 5. 3 User preference 5. 4 System Setting 5. 5 Utility 6. 0 oThER oPERATIons 6. 1 Electronic program guide (EPG) 6. 2 Zapping and information banners 6. 3 Audio Language selection 6. 4 Channel list and view mode 6. 5 FAV list 6. 6 Teletext function 6. 7 Subtitle function 6. 8 Sleep Timer function 6. 9 Zoom function A. 1 TRoUblEshooTIng A. 2 PIn CoDE A. 3 sPECIfICATIons 2 2 3 3 3 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6 8 8 9 9 10 10 10 10 11 11 11 11 11 11 11 12 12 1 English PART 1 · English 1. 0 InTRoDUCTIon 1. 1 safety Instructions Grounding, Polarization -- If this product is used with a specified AC adapter, the adaptermay be equipped with a polarized alternating current line plug (a plug with one blade wider than the other). This safety feature allows the plug to fit into the power outlet only one way. If you cannot insert the plug into the wall outlet, pull it out, reverse it, and then reinsert it. If the plug still fails to fit, contact an electrician and have the receptacle replaced n Protecting the Power Cord -- The power supply cord should be placed so it will not bewalked on. [. . . ] Move: Here you can move the position of the selected satellite in the satellite list. Use the numeric buttons to enter new position. Add: Use the numeric buttons to enter orbital position of the new satellite and tu to select between East or West. In case you have chosen transponder these possibilities are available: Delete, Edit, Add. Delete: This will delete the selected transponder. Edit: Use the numeric buttons to enter the new value for the selected Frequency and Symbol rate and use the tu buttons to select the correct Polarisation and FEC. Add: Like described above, but this will add a new transponder. Here you can remove an installed satellite from the list. Use the pq buttons to select the satellite you want to remove, press oK to enter the menu, then PIN-code (default: 0000) is requested. After entering the PIN-code the satellite is marked with X to delete. You can select other satellites to remove or press EXIT. You will be asked for confirmation to delete (oK) or cancel (EXIT). 5. 1. 3 Remove satellite 7 English GOTO X settings: Motor: PART 1 · English 5. 1. 4 satellite search In Satellite Search menu you'll find satellite list and transponder list. Select one or more satellite(s) you want to search and press oK to select. Press RED if you want to Scan ALL channels or gREEn to Scan Free channels. 5. 1. 5 manual TP search This menu allows you to search for specific transponders. Use the pq and tu buttons to select the satellite and transponder you want to search for. Furthermore you can use Network search function to find new appeared transponders. With PID search you can enter specific data of a channel. After setup and selection, pressing oK will start the defined scan. noTE: If Network search function is set to "NO" then receiver will search for the channels that are available from preset transponder table of selected satellite. If it is set to "YES" then receiver additionally search for channels from new transponders via NIT (Network Information Table). Use this option to get newly appeared channels from the satellite. 5. 1. 6 mysat search This function will help you to easily and quickly setup satellite installation. Once receiver has finished you will see satellite/s which is/are found and can execute channel search for Scan ALL channels (RED) or to Scan Free channels (gREEn). 5. 2 Program setting 5. 2. 1 Edit Channels In this menu, you can Rename (YElloW), Move (gREEn), Delete (RED) and Lock (blUE) channels. [. . . ] With the pq buttons you can scroll displayed page number. You can insert page number directly with the numeric buttons. 6. 7 subtitle function In channel view mode press the f2 button. The list of selectable subtitle languages will appear if DVB subtitle available. With the pq buttons select the subtitle language and press the oK button. [. . . ]