User manual STRONG SRT 6825

[. . . ] PART 1 · English Table of Contents 1. 0 1. 1 1. 2 1. 3 1. 4 1. 5 2. 0 Usage Safety Instructions Features & Accessories Safety Precautions Storage Equipment Set-up Your Receiver 2. 1 Front Panel 2. 2 Rear Panel Connections 3. 1 Connecting to your TV & VCR 3. 1. 1 Basic connection with a Scart cable 3. 1. 2 Advanced connection 3. 1. 3 Connection with Audio Cable RCA Connectors 3. 1. 4 Connecting a serial cable 3. 2 Connecting to a satellite dish 3. 2. 1 Connecting a fixed satellite dish to your receiver 3. 2. 2 Connecting multiple fixed dishes to your receiver using a DiSEqC1. 0 switch 3. 2. 3 Connecting a dish on a motorized positioner to your receiver Quick start Navigating in the menu 5. 1 Main Menu 5. 1. 1 Channel Organizer Menu 5. 1. 2 Favourite Organizer Menu 5. 1. 3 The Timer Menu 5. 1. 4 The Installation Menu 5. 1. 4. 1 System Set-up Menu 5. 1. 4. 2 LNB Set-up 5. 1. 4. 3 Channel Set-up 5. 1. 4. 3. 1 Positioner Set-up (if you are using a Motorised positioner with DiSEqC1. 2) 5. 1. 4. 4 Parental Lock - Changing PIN Code 5. 1. 5 Smartcard Remote Control - Basic functions Troubleshooting Glossary of terms 3 4 5 6 7 7 8 8 8 9 9 9 10 10 10 10 10 11 11 12 14 14 15 19 20 21 21 25 26 29 30 32 33 36 38 3. 0 4. 0 5. 0 6. 0 A. 1 A. 2 2 PART 1 · English Thank you for choosing this Strong Digital Satellite Receiver. This receiver is of our latest development and it is designed to be capable of upgrading its software through the satellite. It is highly recommended that you read this manual carefully to safely install your receiver and to achieve its optimum performance. 1. 0 Usage This user manual is applicable for Strong SRT 6825 Digital Satellite Receiver with Embedded Mediaguard and its related accessories. It is advised that first-time and experienced users read this manual in order to safely install the receiver. [. . . ] Select "Time Settings" and press OK or the Right button. Select Time Zone: Press OK or the Right button, and a list of the GMT plus or minus the hours you need for your country is displayed. Using UP/DOWN keys select the correct one, and the receiver will automatically show the current time in your country. To set the time manually: Select GMT usage: Press OK or the Right button and use the UP/DOWN buttons to set the GMT usage to "off". The time setting menu will now activate the bottom two fields of the menu. Adjust Time: Press OK or the Right button. Use your Numeric buttons [0-9] to set the local time. When set, press OK to save the local time. Select Set Date: Press OK or the Right button and set the date the way you have set the time. Note: We advise you to use the GMT time settings, if you use the manual time settings, the time will be lost after the unit has been disconnected from the main power. Press the BACK button until you go back to the Main Menu. Power on Channel: This function allows you to set the channel you want when the receiver turns on. To set the power on channel, apply the following steps: 1. Select Power on Channel and press OK or the Right button. Last Channel: The receiver will start-up with the channel that you viewed before turning the receiver off. Defined Channel: This function allows you to set the channel you want when the receiver turns on. To define the channel, apply the following steps: 1. Press OK or the Right button and select in the TV or radio list of channels the channel you want to have your receiver start-up with. 23 PART 1 · English Software Upgrade: You can download the latest software available including new technologies to your receiver. To upgrade your system, apply the following steps: 1. Select "Software Upgrade" and press OK. Press the Green button to scan the satellite for availability of a newer software version. [. . . ] If the receiver does not work properly after checking the trouble shooting section, please contact the dealer. Don't open the receiver cover, it may cause an electrical shock due to high current voltage and the warranty of your receiver will be void if the receiver has been opened. Symptoms The green/red lights light up No picture and sound TV is set to wrong channel Check if the TV is switched on and set your TV to the correct EXT/ AV Cause Solution The power cord is not Check that the power cord is plugged into the wall outlet on front panel do not plugged in No picture and sound Problem in cable connections between receiver and TV Check if the scart is connected correctly to the TV and to the back of the receiver Disconnect the main power cord of the No picture and sound Receiver "hang-up" receiver from the 220 V main power. Reapply the power and "Reset" from the menu. [. . . ]