User manual STRONG SRT 6850

[. . . ] PART 1 · English Table of Contents 1. 0 1. 1 1. 2 1. 3 1. 4 1. 5 2. 0 Usage Safety Instructions Features & Accessories Safety Precautions Storage Equipment Set-up Your Receiver 2. 1 Front Panel 2. 2 Rear Panel Connections 3. 1 Connecting to your TV & VCR 3. 1. 1 Basic connection with a coaxial cable 3. 1. 2 Basic connection with a Scart cable 3. 1. 3 Advanced connection 3. 1. 4 Connection with Audio Cable RCA Connectors 3. 1. 5 Connection to a digital audio amplifier using the S/PDIF output 3. 1. 6 Connecting a remote eye 3. 1. 7 Connecting a serial cable 3. 2 Connecting to a satellite dish 3. 2. 1 Connecting a fixed satellite dish to your receiver 3. 2. 2 Connecting multiple fixed dishes to your receiver using a DiSEqC1. 0 switch 3. 2. 3 Connecting a dish on a motorized positioner to your receiver Quick start Navigating in the menu 5. 1 Main Menu 5. 1. 1 Channel Organizer Menu 5. 1. 2 Favourite Organizer Menu 5. 1. 3 The Timer Menu 5. 1. 4 The Installation Menu 5. 1. 4. 1 System Set-up Menu 5. 1. 4. 2 LNB Set-up 5. 1. 4. 3 Channel Set-up 5. 1. 4. 3. 1 Positioner Set-up (if you are using a Motorised positioner with DiSEqC1. 2) 5. 1. 4. 4 Parental Lock - Changing PIN Code 5. 1. 5 Smartcard Remote Control - Basic functions Troubleshooting Glossary of terms 3 4 5 6 7 7 8 8 8 10 10 10 10 11 11 12 12 12 13 13 13 13 14 17 17 18 22 23 24 24 29 30 33 34 36 37 40 42 3. 0 4. 0 5. 0 6. 0 A. 1 A. 2 2 PART 1 · English Thank you for choosing this Strong Digital Satellite Receiver. This receiver is of our latest development and it is designed to be capable of upgrading its software through the satellite. It is highly recommended that you read this manual carefully to safely install your receiver and to achieve its optimum performance. 1. 0 Usage This user manual is applicable for Strong SRT 6850 Digital Satellite Receiver with Embedded Mediaguard and its related accessories. It is advised that first-time and experienced users read this manual in order to safely install the receiver. [. . . ] TV Mode: Press OK or the Right button and set your TV mode to "Multi", "PAL" or "NTSC". Video Output: Press OK or the Right button and set your Video mode to "CVBS" (Composite video) or "RGB" (preferred option if your TV set is compatible with it). TV mode: Press OK or the Right button and set your screen mode to "4 : 3" , "4 : 3 Letterbox", or "16 : 9" format. Audio Output : Press OK or the Right button and set your audio output to "Stereo", "Left" or "Right" (left or Right is for mono TV sets) S/PDIF Output: Press OK or the Right button and activate your S/PDIF output on the back of your receiver, so you can connect it to a digital Audio amplifier using an coaxial cable. If you have connected your digital amplifier, set the SPDIF output to: "Enabled". VCR Output: Press OK or the Right button and set the scart output to "Automatic" or "Terminal". If set to "Terminal", the VCR scart signal is not automatically looped through. RF modulator: Press OK or the Right button and set the UHF mode to "PAL B/G", "PAL I" or "PAL D/K". If the TV set is connected using a coaxial (RF) cable, you must select RF modulator type here. The RF modulator type affects the channel audio. (Select PAL I for UK , Pal B/G for use in Central Europe). 25 PART 1 · English RF Channel: Press OK or the Right button and set the UHF channel number to the same UHF channel number of your TV set. This only has to be done if your TV set is connected with a coaxial (RF) Cable. If the UHF Channel numbers of the receiver and the TV set are not set the same, no picture will be displayed. 2. Press BACK until you go back to main menu. Menu Settings: You can set the OSD (On Screen Display) to your personal preferences. You can change the OSD settings by applying the following steps: 1. Select "Menu Settings" and press OK or the Right button. Color Scheme: Press OK or the Right button and set the colours of the OSD menu to "Standard", "Color 1" or "Color 2". Transparency: Press OK or the Right button and select how transparent you want your OSD. Brightness: Press OK or the Right button and select how you want the OSD to be. Duration: Press OK or the Right button and select how long you want the information banner to be on the screen when starting up your receiver or when changing channels. Press BACK until you go back to main menu. [. . . ] If the receiver does not work properly after checking the trouble shooting section, please contact the dealer. Don't open the receiver cover, it may cause an electrical shock due to high current voltage and the warranty of your receiver will be void if the receiver has been opened. Symptoms The green/red lights light up No picture and sound TV is set to wrong channel No picture and sound Problem in cable connections between No picture and sound receiver and TV Receiver "hang-up" No sound Check if the scart and/or RF cable is connected correctly to the TV and to the back of the receiver Disconnect the main power cord of the receiver from the 220V main power. Reapply the power and "Reset" from the menu. [. . . ]