User manual STRONG SRT 7000

[. . . ] Strong has supplied this product with the most recent innovations of software and hardware. Strong reserves the right to make changes in production to the software used by your terrestrial receiver without prior notification. In order to maintain and ensure that your receiver is compatible and updated with the most recent software technology, we recommend that you visit our website to check the latest software. 1. 1 Safety Instructions Warning: DO NOT INSTALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; Directly on top of or under any another equipment; On a surface which might obstruct the ventilation slots. DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES: To direct sunlight or near any other equipment that generates heat; To rain or intense moisture; To any shock which may cause permanent damage to your receiver; To any magnetic objects, such as loudspeakers, transformers, etc. ; To intense vibration; Never open the cover. It is dangerous to touch the inside of the receiver due to high voltage currents and possible electrical hazards. [. . . ] Date: You can set the starting date of the timer action. Time: You can set the starting time of the timer action. Ending Time: You can set the ending time of the channel view when the Timer mode is on Time Interval. Channel: You can select the channel to be shown when the receiver timer mode Powers ON. Press the Red button to save and proceed with another timer event. Press the Green button to save and exit the timer menu. Press the Yellow button to exit the timer menu WITHOUT saving the settings. Tip: You have to select the channel, starting time, and ending time settings if the Timer mode is "Time interval". An error message will appear if any of the settings are incorrect. 5. 1. 4 The Installation Menu (Please see inside cover Screen 1) All settings that are related to TV and channel scan search are within this menu. The installation menu contains several sub menus such as "System Set-up", "Country selection", "Channel Set-up" and "Parental Lock". To access the different sub menus, apply the following: 11 English PART 1 · English 5. 1. 4. 1 System Set-up Menu (Please see inside cover Screen 11) To install your receiver to your personal preferences, go to "System Set-up" menu. Press BACK until you go back to main menu. OSD Settings: You can set the OSD (On Screen Display) on your TV to your personal preferences. You can change the OSD settings by applying the following steps: 1. Select "OSD Settings" and press OK or the Right button. <Please see inside cover Screen 14> 12 PART 1 · English Colour Scheme: Press OK or the Right button and set the colours of the OSD menu to "Basic", "Colour 1" or "Colour 2". Transparency: Press OK or the Right button and select how transparent you want your OSD. Brightness: Press OK or the Right button and select how you want the OSD to be. OSD Timeout: Press OK or the Right button and select how long you want the information banner to be on the screen when starting up your receiver or when changing channels. LCN Mode (Logical Channel Numbering): Automatic numbering of channels through antenna signal. Only usable when broadcaster supports LCN function. In this case switch LCN Mode "ON". [. . . ] See "Timer Menu" (Described in section 5. 1. 3) for details of the timer. Shows the list of available audio languages for the channel you are watching. You can change the audio language you want to hear by using the Up/Down keys, and pressing the OK button. In addition it sets the current channel audio to stereo ((·)), left-mono ((· or right-mono ·)). [. . . ]