User manual STRONG SRT 8102

[. . . ] digital high definition Terrestrial Receiver sRT 8102 user manual Picture similar PART 1 • English Table of Contents 1. 0 Introduction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 Your Receiver 2. 1 PIN-CODE DEFAULT: 0000 2. 2 Front Panel 2. 3 Rear Panel 2. 4 Remote Control 3. 0 Connection 3. 1 Connecting to a Terrestrial Antenna 3. 2 Connecting to TV with HDMI cable 3. 3 Connecting to TV with SCART cable 3. 4 Connecting to a Digital Audio Amplifier and TV using HDMI 3. 5 Connecting a USB storage device 4. 0 Starting up for the first time 5. 0 Quick guide to using your receiver 6. 0 Operation 6. 1 Changing channels 6. 2 Info Banner 6. 3 Selection of audio language 6. 4 Teletext 6. 5 Subtitles 6. 6 Time Shift 6. 7 EPG (Electronic Programme Guide) 6. 8 Instant Recording 7. 0 Main Menu 7. 1 Edit Channel 7. 2 Installation 7. 3 System Setup 7. 4 Tools 7. 5 Games 7. 6 Media+ 8. 0 Troubleshooting 9. 0 Technical Specifications 2 2 2 3 3 3 3 3 3 4 4 5 5 5 5 5 5 6 7 7 7 8 8 8 8 8 8 9 9 9 11 12 14 16 16 18 19 18 Jan 2012 16:03 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. All rights reserved. 1 English PART 1 • English 1. 0 Introduction 1. 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots. [. . . ] The channel is now fixed on its new position. Once all changes are made, press EXIT twice. Select Yes to save the changes or No to discard. 7. 1. 1. 5 Editing channels The Edit function allows you to Sort, Rename or Delete channels. To enter the Edit menu, press BLUE while in TV Channel List. If you made changes in the previous menu, but not saved them yet, you will be asked to do so now. Sort Press RED to enter the Sort menu. Use pq to select the desired sorting method and press OK to confirm. Possible methods are: Name (A-Z):  Sorting in alphabetical order from A to Z. Name (Z-A):  Sorting in alphabetical order from Z to A. Free/Scramble:  First in the list will be Free-To-Air channels. Lock:  unlocked channels will placed first in the list. All Default:  Sorting by searched Order (from lowest to highest frequency or by LCN numbering). Rename Press GREEN in Edit Channel to enable the Rename function. The Rename sign will move up to indicate that Rename is selected. Use pq to highlight the desired channel and press OK to select it. A text field will now pop up at the right of the screen. Use tu pq to select the desired characters and enter them with OK. Once you have finished editing, press BLUE to enter the changes. Once all changes are made, press EXIT twice. Select Yes to save the changes or No to discard. 10 PART 1 • English Delete Press BLUE in Edit Channel to enable the Delete function. The Delete sign will move up to indicate that Delete is selected. Use pq to highlight the desired channel and press OK to mark it for deletion. [. . . ] Warning!  Formatting will permanently delete ALL data stored on the connected device. Please make a backup copy of all data you wish to keep before entering the HDD Format menu. STRONG cannot be held responsible for loss of data from USB devices used with this receiver. Select HDD Format from the Media+ menu and press OK to enter. [. . . ]