User manual STRONG SRT 8527

[. . . ] PART 2 • English Licenses ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO RMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, LLC, 6312 S. Fiddlers Green Circle, Suite 400E, Greenwood Village, Colorado 80111 U. S. A. THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. [. . . ] Use pq to move it and press OK to confirm. Proceed as described for any other channels you wish to move. You can also correct the channel selection for moving by pressing the RED button again. Skip  skip a channel when switching through the channel list, use pq to select the To channel, then press the GREEN button. Now next to the channel’s name the symbol is shown. After that, channels marked with will be ignored when switching through the channels in viewing mode.  Proceed as described for any other channels you wish to skip. You can also correct the channel selection by pressing the GREEN button again. Channels marked for skipping will stay accessible within the channel list. Lock  lock a channel of the channel list, use pq to select the channel, then press the To YELLOW button. Now next to the channel’s name the symbol  is shown. After that, channels marked with  will request the PIN code (DEFAULT PIN: 0000) when switching to it.  Proceed as described for any other channels you wish to lock. You can also correct the channel lock by pressing the YELLOW button again. Delete  delete a channel, use pq to select the channel, then press the BLUE button. Now To you will be asked if you want to delete this channel. The channel(s) you delete from the channel list will be permanently removed, also if this channel is part of the favourite list. Add channels to favourite lists  add a channel to a favourite group, use pq to select the channel, then press the To FAV button. Now the favourite group selection will be shown. Select the group to which the channel should be added with pq and press OK. The selected channel will be marked with the symbol . Additionally you can also select another favourite group where to add this channel. When you have added the channel to the group(s), press EXIT to go back to the channel list. There you can proceed in the same way to add other channels to favourite groups. [. . . ] No signal found. An indoor or outdoor antenna requires turning the antenna power/external power ON. An active antenna requires turning the antenna power/ external power ON. Not all channels are available on the channel list (the list contains less than 32 channels). Insufficient channel frequency signal level PART 2 • English Wrong TV input source selected Select the proper TV input source Check the cables. Check that the cables are properly connected to the outputs of the TV and the receiver. Disconnect the receiver and the TV from the mains. [. . . ]