User manual STRONG SRT 8903

[. . . ] Földi digitális HD beltéri egység SRT 8903 Felhasználói kézikönyv User manual Picture similar PART 2 • English Table of Contents 1. 0 Instruction 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 Your Receiver 2. 1 Default PIN code: 1234 2. 2 Front panel 2. 3 Rear Panel 2. 4 CA Interface 2. 5 Remote Control 2. 6 Installing the Batteries 2. 7 Using the Remote Control 3. 0 Connections 3. 1 Connecting to a terrestrial antenna 3. 2 Connecting to HD TV with HDMI cable 3. 3 Connecting to TV with SCART cable 3. 4 Connecting to TV with cinch cable 3. 5 Connecting to a digital audio amplifier with S/PDIF 3. 6 Connecting to a digital audio amplifier and TV using HDMI 3. 7 Connecting a USB storage device 4. 0 Starting up for the first time 5. 0 Quick guide to using your receiver 6. 0 Operation 6. 1 Changing channels 6. 2 Info Banner 6. 3 Selection of audio language 6. 4 Teletext 6. 5 Subtitles 6. 6 Timeshift 6. 7 EPG (Electronic Programme Guide) 6. 8 Instant Recording 7. 0 Main Menu 7. 1 Edit Channel 7. 2 Installation 7. 3 System Setup 7. 4 Tools 7. 5 Games 7. 6 Media+ 8. 0 Troubleshooting 9. 0 Technical Specifications 23 Aug 2012 16:44 2 2 3 4 4 4 5 5 5 5 5 6 7 7 7 7 7 7 7 8 8 8 8 9 9 9 10 10 10 10 11 11 11 11 11 14 14 18 19 19 21 22 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. Conax is a trademark of Telenor Conax AS, Antenna Hungária is a trademark of Antenna Hungária Zrt, all other product names are trademarks or registered trademarks of their respective owners. [. . . ] The red Lock sign on the top of the screen moves up to indicate that the Lock function is selected. Use pq to select the channel of choice and press OK to lock or unlock it. (DEFAULT PIN: 1234) Locked channel will be marked with the  symbol. Locking/unlocking multiple channels in one session is possible. When all changes have been made, press EXIT twice. Select Yes to save the changes or No to discard. Locking/unlocking multiple channels in one session is possible. 7. 1. 1. 2 Locking channels 7. 1. 1. 3 Skipping channels Channels marked with Skip will be skipped when zapping through channels with the pq buttons. However, these channels are still available from the channel list. To mark channels for skipping, press GREEN in the TV Channel List. The  symbol on the top of the screen moves up to indicate that the Skip function is selected. Use pq to select the channel of choice and press OK to mark or unmark it for skipping. Channels set for skipping will be marked with the  symbol. When all changes have been made, press EXIT twice. Select Yes to save the changes or No to discard. 7. 1. 1. 4 Moving channels in the FAV list Select the Favourite group in which you like to move your channel. To enable the move function, press YELLOW in the TV Channel List – Fav group x. The SW symbol on the top of the screen moves up to indicate that the Move function is selected. Use pq to select the channel of choice and press OK to select it. You can now move the selected channel up or down the channel list using pq. When the channel has been positioned as wished, press OK again. The channel is now fixed on its new position. When all changes have been made, press EXIT twice. Select Yes to save the changes or No to discard. 12 PART 2 • English 7. 1. 1. 5 Sorting channels in the FAV list Select your favourite list in the TV Channel list. [. . . ] Select DVR HDD Information from the Media+ menu and press OK to enter. Press EXIT to leave. 7. 6. 4 HDD Format Warning: The HDD format menu allows you to format the connected USB device. Formatting will permanently delete ALL data stored on the connected device. Please make a backup copy of all data you wish to keep before entering the HDD Format menu. [. . . ]